NEC E421 Flat Panel Television User Manual


 
English-24
English-25
English
PRODUCT SPECIFICATION 42" (E421)
NOTE
* This model complies with the specications listed below.
* Designs and specications are subject to change without notice.
* This model may not be compatible with features and/or specications that
may be added in the future.
* 42” LCD Display (42” viewable) Viewable image size: 1067mm diagonal
Tuner System:
NTSC standard
ATSC standard (8-VSB, Clear-QAM)
Channel Coverage:
VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mild band (A - 8 through
A - 1,
A through I ) Super band (J through
W) Hyper
band (AA through ZZ, AAA, BBB)
Ultra band
(65 through 94, 100 through 135)
Power Source:
AC power supply: 100-240 V ~ 50-
60 Hz
Power Consumption
190W typical
250W max
1 W in standby mode (power cord
plugged in
and power OFF)
Audio Power
10 W + 10 W, Internal Speaker
Video/Audio Terminals:
Rear AV x1: S-Video/Video/Audio
Input
Side AV x1: S-Video/Video/Audio
Input
S-VIDEO INPUT:
Y: 1 V(p-p), 75 ohm, negative sync.
C: 0.286 V(p-p) (burst signal), 75
ohm
VIDEO/AUDIO INPUT:
VIDEO: 1 V(p-p), 75 ohm, negative
sync.
AUDIO: 300mv(rms)
Component INPUT:
Rear Component x2:
Y: 1V(p-p), 75 ohm, including sync.
Pr/Cr: ±0.35V(p-p), 75 ohm
Pb/Cb: ±0.35V(p-p), 75 ohm
AUDIO: 300mv(rms)
Supported resolutions: 1080p,
1080i, 720p, 480p,
480i
HDMI Terminals:
HDMI INPUT: Rear HDMI x2; Side
HDMI x2
HDCP compliant
E-EDID compliant
Supported scan rates: 1080p, 1080i,
720p, 480p,
480i