NEC LCD5710 Flat Panel Television User Manual


 
English-34
Specifications
Product Specifications Analog Input Digital Input
LCD Module 57" /145.0cm diagonal
Pixel Pitch: 0.6518mm
Resolution: 1920 x 1080 dots
Colour: Over 16 million colours (depending on video card used)
Brightness: 450cd/m
2
(Typ.)
Contrast Ratio: 1800:1
Viewing Angle: Up 89°/ Down 89°/ Left 89°/ Right 89° (typ) @ CR>10
Design View Distance: 1500mm
Frequency Horizontal: 15.625/15.734kHz, 31.5kHz - 91.1kHz 31.5kHz - 91.1kHz
Vertical: 50.0/58.0 - 85.0 Hz 50.0/58.0 - 85.0 Hz
Pixel Clock 25.0MHz - 165.0MHz 25.0MHz - 165.0MHz
Viewable Size 1251.4 x 703.9mm
Input Signal
PC-Input: Video: Analog RGB 0.7V p-p TMDS
Input Impedance 75 ohm
Composite sync on Green Video: 0.3Vp-p Neg. (video 0.7Vp-p Pos.)
Sync: Separate: TTL level (Pos./Neg.)
Input Impedance 2.2K ohm (RGB3: 2.2k ohm/75 ohm selectable)
Input-terminal: BNC (R,G,B,H,V) 15pin Mini D-sub DVI-D (Digital)
VIDEO Input: Composite 1.0V p-p Input Impedance 75 ohm BNC and RCA-INPUT
Y/C Y:0.7V p-p C:0.283V p-p Input Impedance 75 ohm S-TERMINAL-INPUT
Component 1.0/0.7V p-p Input Impedance 75 ohm BNC-INPUT
AUDIO Input: RCA PIN-JACK L/R INPUT, STEREO Mini Jack INPUT
RS-232C: In: 9 Pin D-sub
Out: 9 Pin D-sub (with daisy chain)
Output Signal
PC-Output: Video: Analog RGB Video: 0.7V p-p with 75 ohm terminated
(RGB3 only) Sync: Separate HV sync: TTL level (Posi / Nega) with 2.2k ohm terminated
Output-terminal: BNC (R,G,B,H,V)
VIDEO Output: BNC 1 Output, Composite 1.0V p-p with 75 ohm terminated
AUDIO Output: RCA PIN-JACK L/R: 1 Output, 0.15Vrms with 1k ohm terminated
Speaker Output: External Speaker Jack 7W + 7W (8 ohm)
Resolutions Supported 640 x 480 at 60Hz to 85Hz
800 x 600 at 50Hz, 60Hz to 85Hz
1024 x 768 at 50Hz, 60Hz to 85Hz
1280 x 768 at 50Hz, 60Hz to 85Hz
1360 x 768 at 50Hz, 60Hz to 85Hz
1280 x 1024 at 60Hz to 85Hz
1600 x 1200 at 60Hz
1920 x 1080 at 60Hz*................................................. Maximum Resolution
* Recommended Resolution
NTSC/PAL/SECAM/4.43NTSC/PAL60 Component: 480i, 480p, 720p, 1080i
Power Supply 3.9 - 1.65A @ 100-240VAC, 50/60Hz
Operational Temperature: 5 - 40°C
Environment Humidity: 20 - 80% (without condensation)
Storage Temperature: -20 - 60°C
Environment Humidity: 10 - 90% (without condensation)/ 90% - 3.5% x (Temp - 40°C) regarding over 40°C
Dimension Net: 1357.8 (W) x 792.8 (H) x 164 (D) mm (Without stand)
1357.8 (W) x 825.1 (H) x 480 (D) mm (With stand)
Gross: 1587 (W) x 965 (H) x 377 (D) mm
Weight Net: 66.0Kg (With stand), 62.0Kg (Without stand)
Gross: 77.0Kg
VESA compatible arm 3 x 200 mm x 200 mm (8 Holes)
mounting interface 2 x 200 mm x 200 mm (6 Holes)
Complied Regulatory and UL60950-1/CSA C22.2 No.60950-1/ TUV-GS/EN60950-1/NOM/IRAM/CCC/BSMI
Guidelines FCC-B/DOC-B/EN55022/EN55024/EN61000-3-2/EN61000-3-3/CE/GOST-R/PSB/C-tick
Power Management VESA DPM
Plug & Play VESA DDC2B, DDC/CI
Accessories User’s manual, Power Cord, Video Signal Cable, Remote Control, AA Battery x 2,
Clamp x 3, Screw x 4, CD-ROM,
Ferrite Core x 2, Stand*
1
x 2, Curled head Screw for
stand x 2, Band x 2, Speaker plug x 1set, Main power switch cover
NOTE: Technical specifications are subject to change without notice. *1: Depending on where the LCD is sold, the stand may or may not be included with some models.