Filter
Top Products
- 20 -
(2) Connection between existing disk enclosures and additional disk enclosures
Use the FC cable (HSSDC) provided with the additional disk enclosure or the FC
cable (HSSDC) of the separately priced DE cable (NF9120-SJ04E).
Push the connector at either end of the cable into the FC-OUT connector of the
existing disk enclosure until a click is heard.
The FC cable has the same connectors at both ends. Either connector may be
connected to the adapter of the existing disk enclosure.
Push the connector at the other end of the FC cable (HSSDC) into the FC-IN
connector on adapter 0 (ADP0) of the additional disk enclosure until a click is heard.
Similarly, connect the FC-OUT connector on adapter 1 (ADP1) of the existing disk
enclosure to the FC-IN connector on adapter 1 (ADP1) of the additional disk
enclosure.
Subsequently, use the DE diagnosis cable provided with the additional disk
enclosure or the DE diagnosis cable of the separately priced DE cable
(NF9120-SJ04E). Push the connector at either end of the DE diagnosis cable into
the DE-DIAG connector [PORT1] on adapter 0 (ADP0) of the existing disk
enclosure until a click is heard. The DE diagnosis cable has the same connectors at
both ends. Either connector may be connected to the adapter of the existing disk
enclosure.
Push the connector at the other end of the DE diagnosis cable into the DE-DIAG
connector [PORT0] on adapter 0 (ADP0) of the additional disk enclosure until a
click is heard.
Similarly, connect the DE-DIAG connector [PORT1] on adapter 1 (ADP1) of the
existing disk enclosure to the DE-DIAG connector [PORT0] on adapter 1 (ADP1) of
the additional disk enclosure.