Filter
Top Products
- 30 -
(3) Installation of disk drive
With the ejector of the disk drive opened, engage the guides on the top and bottom
faces of the disk drive with the guide grooves on the disk enclosure and insert the
disk drive to the end.
After the disk drive is inserted to the end securely, push down the ejector opened
upward to click for locking.
When inserting the disk drive into the disk enclosure, push it as far as it will
go and then lock the ejector.
Incorrect insertion may cause malfunction.
The disk array unit cannot use the disk drive only if the disk drive is installed
additionally. Provide the proper setting for the disk drive by using the "NEC
Storage Manager" feature of the disk array unit or contact the service
engineer of the maintenance service agent with the expert knowledge.