Filter
Top Products
To watching Monitor
-28-
Turning on the Monitor
Buttons on the Monitor set have the same functions as those of the remote controller.
Turning on the Monitor set.
Plug the power cord to the outlet and press the main power at the front controller panel.
A red lamp will light up.
Operating the Monitor set.
It is LCD-Projection Monitor characteristics that it takes a little while for the video to be
displayed on the screen when it is turned on. This is not malfunctioning; thus, please be
patient and wait for a moment.
The degree of brightness will decrease insignificantly after 3 minutes is passed. This is not a
breakdown; it is only using a power saving process to maximize the lamp's lifetime.
When the power buttons are pressed, the main power lamp may flicker in green, but the
secondary power lamp may flicker in red and orange alternately. In this case, the Monitor's
main power has been erroneously pressed, or has been turned off improperly by a power
stoppage or by any other reason. However, please wait for an instant, and the Monitor will
be back on (the latest 1min. 30sec.) since this is not a malfunctioning of the product.
Press the power button on the remote controller or on the Monitor set.
When the main power lamp flickers on green, the screen will gradually turn on.
During this instance, the power button will not operate.
When the process is completed, the main power lamp lights on green
Monitor
REMOTE
CONTROLLER
POWER
Timer On/Off and the main power lamp flickering in red: Please check whether the air filter and lamp cover is properly fixed
and adjusted.
Timer On/Off and the main power lamp flickering in red and orange alternately: There must be a problem with the lamp. You
may have to change the optical lamp or call for service. (For the lamp exchange, please refer to page 12 of the manual)
Timer On/Off and the main power lamp flickering in orange: There must be a problem in the cooling fan. Please call for
service.
The main power lamp flickering in orange: The product is overheated and its temperature is extremely high for some reason.
Please check if the slots and openings of front and rear panels are blocked impeding its ventilation or if the filter is full of dust
and needs some cleaning. After checking them, press the power button on the remote controller or the one on the Monitor
set to turn on the Monitor and operate again.
Turning off the Monitor
The lamp's lifetime may be reduced if the Monitor set is not turned off properly.
Please read the indications carefully, and power it off as instructed in this manual.
Turning off the Monitor set.
Press the power button on the remote controller or that of the Monitor
set.
Audio and Video will be turned off and the main power lamp will flash
in green at this time. This is not malfunctioning nor an error; it is just
a process of cooling the lamp off. During this time, the power button
will not operate. A red light will light up after a minute.
If the button is pressed within 10 seconds after the power is turned
off, the video will be displayed without the standby period.
Checking proper shut down
Please have the main power on at all times, except
when the unit is not used for a long period of time.
Press the power button when the main power light is in
red.
Improper turning off of the Monitor set may cause a
damage to the lamp.
-29-
POWER
You must press and turn on the main
power button for the remote
controller and the function keys on
the Monitor set to operate. If the
main power is turned off, neither the
remote controller nor the function
keys on the Monitor set will operate.
1. Press the "mute" button
2. The sound will be off if the screen
displays "muting"
3.
When the "mute" button is pressed
once more, the sound will be back on.
For example, use this feature when
there is a telephone call or when there
is a visitor.
There is no damage caused to the
Monitor set if there is no distortion
on the screen image or affect on its
sound quality. This may happen
when the cabinet is compressed by
the internal temperature change.