Filter
Top Products
1
Thank you for purchasing the NETGEAR ANT24D18v2 antenna. This Installation Guide
provides installing instructions and guidelines for using the NETGEAR 14 dBi Patch Panel
Directional Antenna.
Introduction
Package Contents
Reverse N/SMA
adapter
2-meter cable
The package should contain the following items:
NETGEAR Indoor/Outdoor 14 dBi 2.4 ~ 2.5 GHz
Patch Panel Directional Antenna ANT24D18v2
2-meter low loss antenna cable to connect the antenna to a lightning arrestor
Lightning Arrestor
Note: a ground cable is not included but required for outdoor installation. The grounding
cable must be equivalent or better than: AWG 10, UL 1015, Stranded, 600 V, 105 C,
green or green/yellow insulation, 2 clip of 5.5 mm inner diameter cramped at both ends,
cable no longer than 5 meters.
Reverse N/SMA Adapter
Lightning
arrestor
Installation Guide, Warranty and
Support information card
14 dBi Patch Panel Directional
Antenna ANT24D18v2
3 brackets for adjustable positioning, and 2 U-bolts
Sticker and waterproof tape
Screws, angle adj screws, screw nuts, washer,
plastic fixings,