Filter
Top Products
7
6
First, Mount the Antenna
2
2
Warning, Indoor point to multipoint: the ANT24D18v2 is not omnidirectional and is not
suitable when low ceilings, partial obstructions, walls, cubicles, large metal objects, etc. are
present. WLAN communications can suffer from multiple reflections, which are
orientation, environment and time dependent.
The best performance is achieved with a short cable between the antenna and the wireless
device. The shortest approved cable to be used in conjunction with the ANT24D18v2 in
North America is the NETGEAR 1.5 m (ACC-10314-01) cable.
The antenna should be installed so that it is a minimum of 50 cm (20 inches) away
from people.
Installing the 14 dBi Patch Panel
Directional Antenna
There are two parts to the wireless antenna installation process:
Mount the antenna on a pole, or on a wall with adjustable brackets, or on a wall with
fixed brackets.
Connect the appropriate electrical hardware depending on if the installation is indoors or
outdoors.
Follow the instructions in this section of the manual to install your antenna.
Pole Mount Installation