Filter
Top Products
Configuration and Placement
Pole Mount Configuration
This illustration shows the pole mount configuration option.
1
1
Wall Mount Configuration With Adjustable Brackets
This illustration shows the wall mount configuration with adjustable brackets.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer.
Keep the carton, including the original packing materials, in case you need to return the
product for repair.
3 brackets for adjustable positioning, and 2 U-bolts
Screws, angle adj screws, screw nuts, washer, and plastic fixings,
Installation Guide
Warranty/Support Information card
Antenna cable for connecting the wireless device is sold separately. Please use a NETGEAR
model ACC-10314-01, 02, 03, or 04 cable.
To obtain optimal results in extending wireless range with antenna installations, consult a
qualified professional installer for site survey and installation assistance.
In the U.S., the ANT24D18v2 antenna should only be used with devices that have been FCC
approved for use with it. Please check the NETGEAR web site at
http://www.NETGEAR.com/go/antennas_fcc for an updated list of FCC approved devices.
For Europe, use of any antenna requires careful planning and extra consideration to comply
with EU emissions and health standards and regulations. Antenna installation must comply
with the maximum level authorized by each country. Please check the NETGEAR web site at
http://www.NETGEAR.com/go/antennas_eu for a list of restrictions and approved devices.
3
2