Filter
Top Products
22 3. Using TV Features
Ch annelView Channel Listings
ChannelView. Programs for the tuned channel are
listed on right side of screen.
ChannelView™ shows memorized channels on the
ANT
input. It displays channel names and program informa-
tion for digital channels as sent by broadcasters or your
local cable service provider (information may be incom-
plete)
.
No program information is displayed for analog
channels.
Note: You must set the TV Clock ( page 38 )
t
o receive
ChannelView listings for the current channel.
Using ChannelView
Feature Instructions
Receive updates for a
digital channel.
Tune to the channel.1.
Press the 2.
INFO
key.
Display/hide ChannelView
listings from the ANT
input.
GUIDE
Scan channels one by one.
Hold or
Scan channels quickly.
Hold
PAGE UP/PAGE DN
Jump to listings for a spe-
cific channel.
Enter the channel 1.
number.
Press 2.
ENTER
.
See more of the program
description for the current
channel (if available).
INFO
Tune to the highlighted
channel.
ENTER
Redirecting Audio Output
Selecting an Audio Output Device
Press
1.
MORE
and then
9
(AUDIO)
.
Press
2.
to show the Speakers option. The Speak-
ers option will display only if there is a connection
on a TV audio output.
Press
3.
to select either AV Receiver, Head-
phones, or TV.
Disconnecting an Analog A/V Receiver
When you disconnect an analog A /V receiver, change
the Speakers setting to TV to hear sound from the TV
speakers. Change the setting using the remote con-
trol’s
MORE
>
9
(AUDIO
)key or the Adjust > Audio >
Speakers menu.
C ontrolling A/V Receiver Sound
Volume
Use one of the methods below to control sound volume from
an A/V receiver.
With a Standard TV Setup
Recommended Method:• Program the TV’s
remote control for your A/V receiver and enable the
Audio Lock feature. See page 60 .
Program the TV’s remote control for your A/V •
receiver and set the TV remote control’s mode to
AUDIO
. Return the control mode to
TV
to control the
TV.
Use the remote control that came with the A/V •
receiver.
With HDMI Control (CEC-Enabled HDMI
A/V Receiver)
The TV’s remote control may control some functions of
the A/V receiver. See Appendix C , “HDMI Control of
CEC Devices,” page 66 .
With NetCommand IR Control
837 Series. Set up NetCommand control of the A/V
receiver’s volume functions in the Inputs > AVR menu.
The TV’s remote will then control A/V receiver volume.
See page 52 .