Nikon C9 SERIES Flat Panel Television User Manual


 
45
5
Net Command IR Control
Net Command IR home-theater control is avail-
able on 837 series models.
IR emitter cables are available for purchase
from Mitsubishi.
Visit www.mitsuparts.com or call
800-553-7278 and
request one of the following:
242D483020 - (two-ended ca ble)
299P254020 - (four-ended cable).
Net Command setup is optional.
You can perform Net Command setup when the TV
first recognizes a device during Auto Input Sensing
or at any convenient time afterward.
Important Note on NetCommand
Be sure to connect the IR emitter cable to the
TV and properly place the emitters so that
NetCommand can control your devices.
Net Command operates by sending remote control
signals from the TV to your other devices via the
IR (infrared) emitters, telling the devices to play,
record, change inputs, adjust volume, change chan-
nels, or perform other functions. All this is accom-
plished with the TV’s remote control left in
TV
mode.
You may wish to use Net Command IR control to
supplement control of CEC-enabled devices.
About Net Command IR Control