Filter
Top Products
51
High-Speed and Low-Speed Search—Quickly and Accurately Determining Editing Points
Chapter 3 Convenient Functions for Editing Operation
High-Speed and Low-
Speed Search—Quickly
and Accurately
Determining Editing
Points
Use the search function to easily locate the desired scene
and to quickly and accurately determine edit points.
When F. FWD/REW under the AUTO EE SELECT menu
item (see page 60) is set to PB (factory default setting), you
can use the F FWD and REW buttons on this unit or
external equipment for high-speed search.
Search Operations via External
Equipment
You can control the unit in the following operation modes
from an editing control unit connected to the REMOTE
connector on the rear panel, a SIRCS-compatible remote
control unit such as the DSRM-10 connected to the
CONTROL S connector (on the front panel), or control
equipment connected to the i.DV IN/OUT connector.
Shuttle: Use this mode to view color video playback at
speeds ranging from 0 to 60 times normal speed in
both directions.
Note
When controlling the unit from the DSRM-10 for
shuttle-mode search, the maximum search speed is 16
times normal speed in both directions.
Jog: Use this mode for low-speed search and frame-by-
frame search.
Digital slow: Use this mode for noise-free color video
playback at speeds ranging from 0 to
1
/
2
times normal
speed in both directions.
Still: Use this mode to view a still picture of any field.
Jog audio: Use this mode to monitor the audio at speeds
ranging from 1 to
1
/
30
times normal speed in both
directions.
Note
When controlling this unit from external equipment, set
the REMOTE I/F menu item (see page 68) and the
LOCAL/REMOTE switch so that the remote mode
indicators in the display section are on or off as follows.
• When using an editing control unit connected to the
REMOTE connector:
• When using a SIRCS-compatible remote control unit
connected to the CONTROL S connector:
• When using equipment connected to the i.DV IN/
OUT connector:
For description on how to carry out search operations via
external equipment, see the operating instructions for the
equipment.
Switch/menu item Setting
LOCAL/REMOTE switch REMOTE
(REMOTE indicator lights.)
REMOTE I/F menu item 9PIN
(9P indicator lights.)
Switch/menu item Setting
LOCAL/REMOTE switch LOCAL
REMOTE I/F menu item —
Switch/menu item Setting
LOCAL/REMOTE switch REMOTE
(REMOTE indicator lights.)
REMOTE I/F menu item i.LINK
(i.LINK indicator lights.)