Filter
Top Products
GB 19
Advanced manual search
You can use this menu if you are looking for some “specific” chan-
nels (i.e. non-DVB standard channels) which can be more easy to find
when you have entered the necessary PID settings here.
Channel: Select the channel you want to search for.
PID Video: Enter the PID (Packet Identifier) for the video signal.
PID Audio: Enter the PID for the audio signal.
PID PCR: Enter the PID for the PCR (Programme Clock Reference).
•Press ok to tune with the specified values.
Channels created with advanced manual search will get an auto-
matically generated name, e.g. P0001 for the first channel, P0002
for the second etc.
•Press ok to save the new channel or back if you do not want to
save it.
Navi Bars
Access folder
Receiver lock
To get to this menu you first have to enter your access code.
From the factory the access code is set to 1234.
If you select “Yes” you will have to enter the access code every time
you start the Mediamaster from standby.
Age rating control
If you want everybody to have access to all available types of pro-
grammes, select “No”
If you select “Yes” you may block programmes unsuitable for chil-
dren.
Age Limit
Select an age limit between 3 and 18 years on the line that appears.
However, you should be aware that not all Service Providers have
the necessary codes for these functions implemented in their trans-
missions.
Change access code
From here you can change the access code from the standard
1234. DO NOT FORGET IT! Without it you do not have access to
any of the functions where the code is required!
If you forget it, please contact Nokia Support for help.