Filter
Top Products
11
TV Installation and Connection Guide
Identifying Front and Rear Connectors
Rear Panel
AC IN power cord connects here.
HDMI and VGA Port This display
includes a HDMI input that receives analog or
digital video signals through the interface for
the display of high quality digital video signals.
The HDMI port is HDCP (High Bandwidth
Digital Content Protection) compliant and is
fully compatible with video equipment that
features the HDCP function. The VGA input
can be used for analog RGB signals from a HD
Receiver or personal computer. Resolutions
supported are VGA, SVGA, XGA and WXGA.
Service Port is reserved for manufacturer use.
Incorrect use may damage the Display.
Antenna (ANT) Antenna receives signals from
VHF/ UHF antennas or a cable system.
DTV Digital Television Input
The DTV input receives digital broadcasts
programs on VHF/UHF TV signals from a built
in ATSC digital receiver.
Audio Out The Audio Output sends the TV's
connected audio signals to an A/V receiver or
other equipment. Display features a R/L stereo
output.
Component 1, 2 These inputs can be used for the
connection of A/V equipment with component
video outputs, such as a DVD player, Digital
Satellite Receiver, or compatible Video Game
System.
Video 1,2 These inputs can be used for the
connection of a VCR, Super VHS (S-VHS) VCR,
DVD player, or other video devices to the TV.
There is a Video and an S-Video input for Video1
and video 2. When both inputs are used
simultaneously on Video 1, only the S-Video
input will be recognized. Same behavior for
Video 2. The display will automatically detect
the input being used.
NOTE: The S-Video input has a better quality of
picture than a composite Video signal.
ANT
AV
AV
Y
Y
L
L
R
R
R
R
R
L
L
L
Ear Phone
S-Video
S-Video
Pb/Cb
VIDEO-1 VIDEO-2
Audio
Output
Component-1 Component-2
Pb/Cb
Pr/Cr Pr/Cr
DTV
HDMI
L
R
Service
Port
VGA