Filter
Top Products
21
TV Installation and Connection Guide
Connecting to a Satellite Receiver or Cable Box With Component
Connectors
Use this hookup if your Satellite Receiver or Cable Box has component (Y, Pb, Pr) jacks.
1.Using a component video cable, connect the Satellite Receiver or Cable Boxes' Y, Pb and
Pr jacks to the Y, Pb and Pr jacks on the TV.
Colors on Component Video connectors:
Y: Green
Pb (also identified as Cb, CB or B-Y): Blue
Pr (also identified as Cr, CR or R-Y): Red
Note: The Y, Pb and Pr jacks on your Satellite Receiver or Cable Box are sometimes labelled
as Y, Cb and Cr, or B-Y and R-Y. If so, connect the cables to the
matching colors.
2.Using an Audio cable, connect the Satellite Receiver or Cable Boxes' Audio OUT jacks to
the TV's Audio in jacks.
Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must
be connected to provide sound.
Note: The YPbPr connection provides the best quality of video signal
compared to AV (composite) and S-Video connection.
Disconnect all power sources before making any connections.
Component cable with RCA connector
Audio cable
Rear of TV
ANT
AV
AV
Y
Y
L
L
R
R
R
R
R
L
L
L
Ear Phone
S-Video
S-Video
Pb/Cb
VIDEO-1 VIDEO-2
Audio
Output
Component-1 Component-2
Pb/Cb
Pr/Cr Pr/Cr
DTV
Green
Red
Blue
Red
White
Satellite Receiver or Cable Box