Filter
Top Products
23
TV Installation and Connection Guide
Connecting to a DVD Player with A/V or S Video
Cables
Use this hookup if your DVD player does not have component (Y, Pb,
Pr) jacks.
Note: If your DVD player has component video output connectors, for
best picture quality, use the connection described for Connecting to a
DVD Player With Component Connectors.(See page.17)
1.Using an A/V cable, connect the DVD player's Audio OUT jacks to
the TV's Audio IN jacks.
2.Using an SVideo Cable, connect the DVD player's S Video OUT jack
to the TV's S Video IN jack.
Note: When you connect video equipment to both the same Video and
S-Video input jacks, the display will automatically select S-Video first.
To view Video signal, please disconnect the S-Video jack or turn off the
Video signal on the video equipment.
S-Video is strongly recommended for use if your VCR or video
equipment has it S-Video input has better quality of picture than a
composite Video signal.
Note: You can also use the Video 2 jacks located on the TV rear, or
Video 3 located on the right side of the display to connect additional
video equipment.
Disconnect all power sources before making any connections.
ANT
DTV
Audio
Output
C
C
b
b
b
b
P
P
C
C
r
r
r
r
P
P
VIDEO-1VIDEO-2
Component-1Component-2
Rear of TV
Yellow
Red
White
A/V cable with RCA connector
S Video cable
DVD player