Filter
Top Products
24
TV Installation and Connection Guide
Connecting to a DVD Player With Component
Cables
Use this hookup if your DVD Player has component (Y, Pb, Pr) jacks.
1.Using a component video cable, connect the DVD Player's Y, Pb and
Pr jacks to the Y, Pb and Pr jacks on the TV.
Colors on Component Video connectors:
Y: Green
Pb (also identified as Cb, CB or B-Y): Blue
Pr (also identified as Cr, CR or R-Y): Red
Note: The Y, Pb and Pr jacks on your DVD player are sometimes labeled
as Y, Cb and Cr, or B-Y and R-Y. If so, connect the cables to the
matching colors.
2.Using an Audio cable, connect the DVD player's Audio OUT jacks to
the TV's Audio in jacks.
Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must
be connected to provide sound.
Note: The YPbPr connection provides the best quality of video signal
compared to AV (Composite) and S-Video connection.
Disconnect all power sources before making any connections.
ANT
DTV
Audio
Output
C
C
b
b
b
b
P
P
C
C
r
r
r
r
P
P
VIDEO-1VIDEO-2
Component-1Component-2
Rear of TV
Green
Red
Blue
Component cable with RCA connector
DVD player
Red
White
Audio cable