Filter
Top Products
27
TV Installation and Connection Guide
Connecting to a PC with VGA
Connector
1.Using a D-Sub 15 pin cable, connect the VGA
output terminal of the PC to the TV's VGA signal
input terminal.
2.You may need to use a Stereo mini jack to RCA
L/R connectors to receive audio.
Connecting to a DVD Player or HD-
Receiver with a HDMI Cable
1. Using a HDMI cable, connect the DVD's HDMI
output terminal to one of the TV's HDMI-HDCP
input terminals.
2.Using an Audio cable, connect the DVD's Audio
OUT jacks to the TV's Audio IN jacks.
Note: HDCP is a copy protected digital connection
that receives digital video signals from equipment
with a HDMI output that features the HDCP function.
HDMI allows the transfer of digital uncompressed
data to the TV. This connection is superior when
compared to the Component, S Video or AV
(composite) connections.
Note: HDMI signal is purely digital and provides a
crystal clear technology better than component,
S-Video or Video connections. It is strongly
recommended to use this connection if you have this
function on your equipment.
Disconnect all power sources before making
any connections.
Disconnect all power sources before making
any connections.
Service
Port
L
R
VGA
HDMI 2
HDMI 1
Rear of TV
D-sub
15 pin cable
Red
White
Service
Port
L
R
VGA
HDMI 2
HDMI 1
Rear of TV
Red
White