One for All OARI06G Universal Remote User Manual


  Open as PDF
of 66
 
19
English
#HECKINGTHE0ROGRAMMED#ODES
The One For All SmartControl remote uses different codes
to control different devices. You can set up those codes by
using One For All SimpleSet, Direct code setup, or the Code
search. If you ever need to find out what code you’re using
to control a different device, follow the steps below.
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Use the device select keys to highlight the device whose
CODEYOUWANTTOCHECK&OREXAMPLETOlNDTHE46
code, highlight TV.
3. Press 9 9 0. The blue ring flashes twice.
4. Press 1 and count how many times the blue ring flashes.
This is the first digit of your code—write it down in the
space below. Note: If the blue ring does not flash at all,
the digit is “0”.
5. Press 2 and count how many times the blue ring flashes.
This is the second digit of your code—write it down in
the space below. Note: If the blue ring does not flash at
all, the digit is “0”.
6. Press 3 and count how many times the blue ring flashes.
This is the third digit of your code—write it down in the
space below. Note: If the blue ring does not flash at all,
the digit is “0”.
7. Press 4 and count how many times the blue ring flashes.
This is the fourth digit of your code—write it down in the
space below. Note: If the blue ring does not flash at all,
the digit is “0”.
8. To check the codes of other devices, repeat steps 1–7 and
highlight a different device in step 2.
tv
sat/cbl/dtc
dvd
media
audio
DVRAUX
4OCLEARAMACROANDGOBACKTOTHEKEYSORIGINAL
FUNCTION
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 9 5.
3. Press the macro key you want to clear.
4. Press and hold the SETUP key until the blue ring flashes
twice.
The macro you programmed to this key is now cleared, and
the key goes back to its original function.
 previous next