One for All OARI06G Universal Remote User Manual


  Open as PDF
of 66
 
20
4ROUBLESHOOTING
The ONE FOR ALL is not performing commands
properly.
You may be using the wrong code.
s )FYOUUSED/NE&OR!LL3IMPLE3ET2EPEAT/NE&OR!LL
SimpleSet (see the 1-2-3 Programming guide).
s )FYOUUSED$IRECT#ODE3ETUP4RYTHENEXTCODELISTEDFOR
your brand (see page 4).
s )FYOUUSEDTHE#ODE3EARCHMETHOD3TARTTHESEARCH
again to locate the proper code (see page 5).
My brand is not listed in the Code List.
Try the Code Search.
The device indicator is dim or doesn’t light up at all.
Replace batteries with four new AAA alkaline batteries.
The device indicator blinks when I press a key, but
home entertainment device does not respond.
Make sure the remote control is aimed at your home
entertainment device and is not farther than 15 feet away.
The unit does not control home entertainment devices
or commands are not working properly.
Try One For All SimpleSet programming again. If the remote
STILLDOESNTCONTROLYOURDEVICETHEWAYYOUEXPECTTRYTHE
$IRECT#ODE3ETUP+EEPTRYINGCODESFROMTHECODELISTUNTIL
you find the one the controls your device the way you want
it to.
The One For All SmartControl keys aren’t working with
my home theater.
You must set up the One For All SmartControl remote to
work with your home theater before you can use these keys.
See page 9 for more information.
The audio/video help keys don’t work with my home
theater.
Make sure you’re in One For All SmartControl mode (press
one of the activity keys to make sure). The audio/video
help keys work in One For All SmartControl mode only. If
these keys still don’t work, you might need to set up One
For All SmartControl (see page 9), reconfigure One For All
SmartControl (see page 9), or reconfigure the way the help
keys work (see page 13).
The channel, volume, or playback keys are controlling
the wrong device in One For All SmartControl mode.
You might need to reconfigure One For All SmartControl. See
page 9 for more information.
2ESETTINGTHE2EMOTE
Resetting the remote erases all macros, volume lock, One For
All SmartControl setup information, and learned functions.
4ORESETTHEREMOTE
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 8 0. The blue ring flashes twice.
 previous next