Onkyo BD-SP807 DVD Player User Manual


 
9
EN
51
7
432 6
8
BDSP807BDSP807
BLU-RAY DISC PLAYER
ON
STANDBY
C
DB
DDVD
STANDBY
SD CARD
7316 129
*
213
*
10 1
4
845 11
FUNCTIONAL OVERVIEW
* The unit can also be turned on by pressing these buttons.
1.
I
/
y
y
ON/STANDBY button
Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord)
2. STANDBY indicator
This indicator lights up in red when the unit is in
standby mode and turns off when the unit is active.
3. CD indicator
This indicator lights up in green when a CD is
inserted in this unit.
4. BD indicator
This indicator lights up in blue when a BD is inserted
in this unit.
5. DVD indicator
This indicator lights up in orange when a DVD is
inserted in this unit.
6. Infrared sensor window
Receive signals from your remote control so that
you can control the unit from a distance.
7. Disc tray
Place a disc when opening the disc tray.
8. Display
Refer to “Front Panel Display” on page 12.
9. A (open / close) button*
Press to open or close the disc tray.
10. SD CARD slot
Insert an SD Memory Card, and play back the
contents in it.
11.
k
(pause) button
Press to pause playback.
12. C (stop) button
Press to stop playback.
13. B (play) button*
Press to start or resume playback.
14. H / G (skip down / up) buttons
Press to skip down / up titles / chapters / tracks/files.
1. AC INLET terminal
Connect the supplied AC power cord for a standard
AC outlet to supply power to this unit.
Unplug this cord from the AC outlet to completely
shut down the unit.
2. AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks
Use to connect an AV receiver / amplifier, Dolby
Digital / DTS decoder or other device with a digital
audio optical / coaxial input jack with a digital audio
optical / coaxial cable.
3. VIDEO OUTPUT (COMPONENT) jacks
Use to connect a TV or AV receiver with component
video inputs with an RCA component video cable.
4. VIDEO OUTPUT (VIDEO) jack
Use to connect a TV, an AV receiver or other device
with an RCA video cable.
5. AUDIO OUTPUT (DOWN MIX L / R) jacks
Use to connect a TV, an AV receiver / amplifier or
other device with an RCA audio cable.
6. AUDIO OUTPUT (ANALOG 7.1ch) jacks
Use an RCA audio cable to connect these jacks to
the 7.1-channel audio input jacks of your amplifier
with 7.1-channel input terminals.
7. ETHERNET terminal
Use to connect a telecommunications equipment
with LAN cable.
8. HDMI OUT jack
Use to connect a TV, an AV receiver / amplifier or
other device with an HDMI compatible port with an
HDMI cable.
Note
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
This unit does not have the RF modulator.
Front Panel
Rear Panel