Filter
Top Products
21
Connecting the Power/Turning on the DV-SP305
Before connecting
• Make sure that all the connections on pages 16–20 are
complete (the connection to a TV is required).
Note:
• This player features a screen saver and an auto power
off function. If the player is stopped and no button is
pressed for five minutes, the screen saver starts. If the
disc tray is closed but no disc is playing and no control
is pressed for 30 minutes, the player automatically
goes into standby.
STANDBY/ON
ON STANDBY
PLAY
MODE
DISPLAY
MENU
SETUP
TOP MENU
RETURN
AUDIO ANGLE SUBTITLE ZOOM
RC-616DV
CLEAR
OPEN/
CLOSE
ENTER
123
6
789
0
45
ON
1
Plug the supplied power cord into
the AC INLET and then into the
power outlet on the wall.
• Do not use a power cord other than the
one supplied with the DV-SP305. The
power cord supplied is designed for
use with the DV-SP305 and should not
be used with any other device.
• Never have the power cord discon-
nected from the DV-SP305 while the
other end is plugged into the wall out-
let. Doing so may cause an electric
shock. Always connect by plugging
into the wall outlet last and disconnect
by unplugging from the wall outlet
first.
2
Press STANDBY/ON on the
DV-SP305 or ON on the remote
controller.
The DVD Player turns on.
• To put the DV-SP305 in the standby
mode, press STANDBY/ON on the
DV-SP305, or STANDBY on the
remote controller. Be sure to set the
volume to minimum before putting the
DV-SP305 in the standby mode for the
next use to avoid sudden loud sound
reproduction.
• Setting the STANDBY/ON button to
standby does not shut off the power
completely.
To a wall
outlet
ON
Remote
controller