Filter
Top Products
SETUP MENU OPTIONS
33
• Auto – No system conversion is performed. The output video system is the same as that
encoded on the disc. Requires TV that supports multi-systems.
• PAL – When playing PAL-encoded discs, no system conversion is performed. NTSC-
encoded contents are converted to PAL output.
• NTSC – When playing NTSC-encoded discs, no system conversion is performed. PAL-
encoded contents are converted to NTSC output.
2. PBC – Play Back Control: To enable/disable play back control by disc contents. The options
are:
• On – If the disc contains Play Back Control, follow the disc instructions.
• Off – Play back the contents by sequence.
3. Audio: To set the preferred audio language for DVD. If an audio track of the selected language
is available on the disc, the audio track will be played back.
4. Subtitle: To set the preferred subtitle language for DVD. If a subtitle of the selected language
is available, it will be displayed. When “Auto” is selected, the subtitle display is decided by the
disc.
5. Disc Menu: To set the preferred language for displaying DVD disc menus. If a disc menu of the
selected language is available, the menu will be shown instead of the default disc menu.
NOTES
If your preferred language is not listed in the Audio, Subtitle or Disc Menu options, select “Other” and
enter the Language Code found on page
36 of this manual.
6. Parental Control: To set parental control ratings in order to prevent minors from watching
inappropriate contents. This function requires that the disc being properly rated and encoded.
• Press the SELECT button to bring up the rating selection menu.
• Press the UP/DOWN ARROW buttons to select the rating to allow. The selected rating and
below will be allowed, and any rating above the selected will be blocked.
• Press the SELECT button to confirm the selection. You will be asked for the parental
control password. Enter the password (default password: 7890) and press the SELECT
button.
7. Password: To set parental control password. To change the password, enter the old password
(default: 7890) and then enter a 4-digit number as the new password. Enter the new password
again to confirm, and then press the SELECT button.
8. Default: To reset all settings to the factory default value. The parental control password will not
be reset.