Filter
Top Products
14
If you use a cable box:
• You must select channels using the cable
box.
• The cable box unscrambles premium cable
channels. To watch or record premium
channels, you must already subscribe to
them from your cable company.
Important: Some states have laws restricting
direct connections to cable wires (connections
that do not go through a cable box). Check the
laws in your area before you make connec-
tions.
Important Reminder to the CATV System In-
staller: You must comply with Section 820-40
of the National Electrical Code, which provides
guidelines for proper grounding and, in particu-
lar, specifies that the cable ground shall be
connected to the building’s grounding system,
as close to the point of cable entry as practical.
Using the TV’s Audio/Video
Input Jacks
1. Connect the CATV cable directly to the
VCR’s
VHF/UHF CATV IN
input terminal.
2. Use video quality shielded cables with
phono-type connections (such as Cat. No.
15-1538, not supplied) to connect the
VCR’s
AUDIO/VIDEO OUT
jacks to your
TV’s Audio/Video input jacks.
Note: Do not use standard audio cables for
this connection.
75-Ohm Cable
16-546.fm Page 14 Tuesday, July 20, 1999 4:25 PM