Filter
Top Products
15
Using the TV’s
Single VHF/UHF F-Connector
1. Connect the CATV cable directly to the
VCR’s
VHF/UHF CATV IN
input terminal.
2. Use the supplied 75-ohm cable to connect
the VCR’s
VHF/UHF CATV OUT
F-connector
to your TV’s VHF/UHF antenna input F-
connector.
Using the TV’s
Single VHF F-Connector and
Double Screw UHF Screw Terminals
If your TV has a single VHF F-connector and
double UHF screw terminals, you need a band
splitter (such as Cat. No. 15-1231, not sup-
plied) to connect your VCR to the separate
VHF and UHF terminals.
1. Connect the CATV cable directly to the
VCR’s
VHF/UHF CATV IN
input terminal.
2. Connect the band splitter’s 75-ohm input
cable to the VCR’s
VHF/UHF CATV OUT
ter-
minals.
3. Connect the splitter’s VHF 75-ohm F-con-
nector to your TV’s single VHF input F-con-
nector.
4. Connect the splitter’s UHF 300-ohm gold
wires to your TV’s double UHF input screw
terminals.
75-Ohm Cable
VHF/UHF
UHF VHF
75
-
Ohm
Cable
VHF/UHF
75-Ohm Cable
75-Ohm Cable
VHF/UHF
UHF VHF
300-Ohm
UHF Output
Band Splitter
75-Ohm
VHF Output
75-Ohm Cable
16-546.fm Page 15 Tuesday, July 20, 1999 4:25 PM