Filter
Top Products
–
11
–
EN
Functions
Resume
Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
Slow Forward / Reverse
Press [FWD g] or [REV h] repeatedly in
the pause mode to select the required forward
or reverse speed.
To continue playback, press [PLAY B].
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
Hint
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in
the slow playback mode are blurred. (Refer to pages 17-18.)
Fast Forward / Reverse Search
Use [FWD g] or [REV h] repeatedly
during playback to select the required forward
or reverse speed.
To continue playback, press [PLAY B].
Before: Turn on the TV, amplifier and any other equipments which are connected to this unit.
Make sure the TV and audio receiver (commercially available) are set to the correct channel.
Functions
1
E
1
Hint
• When you play an MP3/WMA-format disc, details on page 12.
• A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.
• Some DVDs may start playback from title 2 or 3 due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.
Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.
Playback
Hint
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if
pictures in the pause mode are blurred. (Refer to pages 17-18.)
TIP: You can change the On-Screen language in “PLAYER MENU” setting. (Refer to page 17.)
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Resume ON
Hint
•
To cancel resume, press [STOP C] one more time in the stop mode.
• For MP3/WMA, playback will resume from the beginning of the
track at which playback was stopped.
•
The resume information will be kept even when unit is in standby mode.
Hint
• For DVDs, fast forward or reverse search speed is different
depending on the disc. Approximate speed is 1(x2), 2(x8), 3(x20),
4(x50) and 5(x100).
• For Audio CDs and MP3/WMA, approximate speed is 1(x2), 2(x8)
and 3(x30).
Hint
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• It may take several seconds to slide the zoomed picture.
Zoom
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.
2) Use [K / L / s / B] to slide the zoomed picture across
the screen.
x2 x4
3)
To exit zoom function, press [ZOOM] repeatedly to select OFF.
(
⇒
Page 12
)
1
Press [POWER] to turn on the DVD/CD Player.
2
Press [OPEN / CLOSE] and insert a disc
with label facing up.
3
Press [PLAY B ] to start playback.
4
Press [STOP C ] to stop playback.
<Example : DVD>
DVD menu
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
POWER
AUDIO
SUBTITLE
ANGLE
REPEAT
CLEAR HDMI
A
-
B
PAU S E
SLOW
SKIP
OPEN/CLOSE
DISPLAY
SEARCH
MODE
12
3
45
6
78
9
0
PLAY
REV FWD
STOP
4
3
POWER SKIP SKIPPLAY STOP OPEN/CLOSE
23 4 2
2
1
1
2
DVL1000G_E6A22UD.indd.indd 11DVL1000G_E6A22UD.indd.indd 11 2006/03/25 13:05:552006/03/25 13:05:55