Filter
Top Products
18
EN
W
ATCHING TV
Switching Audio Mode
This section describes how to switch the audio language.
TV
1
Press [AUDIO] to display the currently selected
audio mode. While receiving an MTS broadcast,
press repeatedly to cycle through the available audio
channel.
6
SAP / STEREO
When all audio are available
SAP / STEREO SAP / MONO
SAP / STEREO
When stereo and monaural audio are available
MONO / STEREO MONO / STEREO
When SAP and monaural audio are available
SAP / MONO SAP / MONO
When only monaural audio is available
MONO
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
The current mode will automatically disappear in 4
seconds.
5
•
DTV
1
Press [AUDIO] to display the currently selected
language and the number of available languages.
6-1
English 1/3
2
Press [AUDIO] repeatedly to cycle through the
available audio languages.
English 1/3 Spanish 2/3
Other 3/3
Available languages differ depending on the
broadcast. “Other” is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.
The current mode will automatically disappear in 4
seconds.
Note:
• Pressing [AUDIO] does not control external audio device.
•
•
(Cannot be switched)
A71F0UH_EN.indd 18A71F0UH_EN.indd 18 2/9/2007 10:17:29 AM2/9/2007 10:17:29 AM