Filter
Top Products
23
EN
WATCHING TVINTRODUCTION CONNECTION INITIAL SETTING
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
Manual Register
The manual register function lets you add the channels that were not added
by the auto channel scan due to the reception condition at the initial setting.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K
/
L] to select “CHANNEL”, then press
[ENTER].
3
Use [Cursor K
/
L] to select “Manual Register”, then
press [ENTER].
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].
Manual Register
Manual Register
For analog channels,
select a channel to register
using number keys.
For digital channels,
you must perform Autoscan function.
Register
Ch Change
11
Back
BACK
5
Press [SETUP] to exit.
Note:
• If set up completes successfully, “Registered to the Channel
List” is displayed.
• If external input is used, it is not possible to register the
channel and “Unavailable” will be displayed on the TV
screen.
5 Antenna Confirmation
This function lets you check the signal strength of each channel.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K
/
L] to select “CHANNEL”, then press
[ENTER].
3
Use [Cursor K
/
L] to select “Antenna”, then press
[ENTER].
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
4
Use [the Number buttons] or [CH K
/
L] to select the
channel for which you want to check the signal strength.
Antenna
Antenna
Back
Ch Change
11
CH
Now 0 0 Peak
If the channel is set to external input, you cannot
confirm the antenna condition.
Antenna
Antenna
Back
Ch Change
Video1
CH
Indicator is available
for antenna signal only.
5
Press [SETUP] to exit.
5
•
A71F0UH_EN.indd 23A71F0UH_EN.indd 23 2/9/2007 10:17:30 AM2/9/2007 10:17:30 AM