Filter
Top Products
–
15
–
EN
0C28
–
15
–
LANGUAGE SELECTION
If you want to change the language of the on-screen
menu, follow the procedure below.
1
Press the SETUP button so that the
setup display appears on the TV
screen.
2
Press the Arrow K or L button to
point to "LANGUAGE".
3
Select "ENGLISH", "ESPAÑOL" = Spanish or
"FRANÇAIS" = French by using the Arrow s or B
button.
4
Press the SETUP button to exit the setup.
NOTE: An on-screen display language must be
selected each for the TV mode and DVD mode.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
CHANNEL PRESETTING
To preset a channel or to change a preset channel,
follow the procedure below.
1
Press the SETUP button so that the
setup display appears on the TV
screen.
2
Press the Arrow K or L button to
point to "CHANNEL SET". Then,
press the Arrow B button.
3
Press the Arrow K or L button to
point to "AUTO MEMO". Then,
press the Arrow B button.
The tuner scans and memorizes all
active channels in your area.
•
The TV distinguishes between standard TV chan-
nels and cable channels.
•
When AUTO MEMO action is completed, the low-
est memorized channel reappears on the screen.
•
When you press the Arrow K or L button after
selecting AUTO MEMO, the tuner will stop at the
memorized channels only.
•
The TV/VCR may memorize TV channels as
CATV channels if reception conditions are poor. If
this happens, try the AUTO MEMO action again
when reception conditions are better.
[ADD/DELETE FUNCTION]
1)Press the SETUP button so that the setup display
appears on the TV screen.
2)Press the Arrow K or L button
to point to "CHANNEL SET".
Then, press the Arrow B button.
3)Press the Arrow K or L button
to point to "ADD/DELETE".
Then press the Arrow B button.
4)Use the Arrow K or L button to
select the channel you wish to
put into memory or to erase from memory.
NOTE: The display will return to the screen in
about 10 seconds. Perform "ADD/DELETE" func-
tion while this display appears on the screen.
•
Press the Arrow s or B button to light up the
channel number in LIGHT BLUE if you wish to
add the channel into memory.
•
Press the Arrow s or B button to light up the
channel number in LIGHT RED if you wish to
erase the channel from memory.
5)Press the SETUP button to exit the setup.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
ADD/DELETE
AUTO MEMO
ADD/DELETE
AUTO MEMO
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
Getting started
1
Connect the power cord to a standard AC outlet.
NOTE: If some digits appear in the corner of the
screen, press the POWER button without unplugging
the power cord.
2
Press the POWER button to turn on the TV/DVD.
3
Press the SELECT button on the remote control until
channel number or "TV" appears on the screen.
TV SECTION
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
SET UP FOR USE
TD253-Body 02.11.28 13:37 Page 15