Filter
Top Products
–
18
–
EN
0C28
–
18
–
V-CHIP SET UP
V-CHIP enables parents to prevent their children
from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except
for news and sports programs, unedited movies on
premium cable channels, and Emergency Broadcast
System signals), then denies access to programming
if the program's rating meets the limitations you
select. In this case, "PROTECTED PROGRAM by
..." message appears on the TV screen. You can
watch the protected program by entering access code
(default 0000).
To block ratings, follow the steps below.
•
Programming may be rated by the Motion Picture
Association of America (MPAA) or according to
the Television Parental Guidelines. In order to
block any inappropriate programming, set your
limits in both places (MPAA RATING and TV
RATING).
•
You cannot access the menu when the "PROTECT-
ED PROGRAM by ..." message appears. In this
case, change to the unblocked channel, then press
the SETUP button.
[MPAA RATING SET UP]
1
Press the SETUP button so that the setup display
appears on the TV screen.
2
Press the Arrow K or L button to
point to "V-CHIP SET UP". Then,
press the Arrow B button.
3
Use the number buttons to enter 4-
digit access code. The default code
is 0000.
4
Press the Arrow K or L button to
point to "MPAA RATING". Then,
press the Arrow B button.
5
Press the Arrow K or L button to
point to your desired item.
Then, press the Arrow B button to
select [BLOCK] or [VIEW].
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV RATING
MPAA RATING
CHANGE CODE
•
When you select the rating category and turn it
[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn
[VIEW] automatically.
•
When you turn "G" to [BLOCK] or [VIEW], the
all ratings will turn to [BLOCK] or [VIEW] auto-
matically.
•
When you turn "X" to [VIEW], the all ratings will
turn to [VIEW] automatically.
5
Press the SETUP button to exit the setup.
[TV RATING SET UP]
1
Press the SETUP button so that the setup display
appears on the TV screen.
2
Press the Arrow K or L button to
point to "V-CHIP SET UP". Then,
press the Arrow B button.
3
Use the number buttons to enter 4-
digit access code. The default code
is 0000.
4
Press the Arrow K or L button to
point to "TV RATING". Then,
press the Arrow B button.
4
Press the Arrow K or L button to
point to your desired item. Then,
press the Arrow B button to select
[BLOCK] or [VIEW].
<Selection> <Rating Category Explanations>
• G: General Audience
• PG: Parental Guidance suggested.
• PG-13: Unsuitable for children under 13
• R: Restricted; under 17 requires
accompanying parent or adult
guardian
• NC-17: No one under 17 admitted
• X: Mature audience only
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
ACCESS CODE
- - - -
TV RATING
MPAA RATING
CHANGE CODE
G [VIEW]
PG
[VIEW]
PG-13
[VIEW]
R
[BLOCK]
NC-17
[BLOCK]
X
[BLOCK]
ACCESS CODE
- - - -
TV-Y
[VIEW]
TV-Y7 ( )
[VIEW]
TV-G
[VIEW]
TV-PG
( )
[VIEW]
TV-14
( )
[VIEW]
TV-MA ( )
[VIEW]
TD253-Body 02.11.28 13:37 Page 18