Filter
Top Products
34
PB
Press the <TIME> soft key to advance to the Time
screen which allows the user to adjust the minimum
time the AUX MODE is active after the battery voltage
falls below the Hysteresis voltage.
Hold Time shows how long the AUX MODE stays active
after the battery voltage has fallen below the HYST
(Hysteresis) set point. The user can adjust the Hold Time
from 0.1 to 25 seconds.
The Delay Time shows how long the battery voltage
must be above the Relative Volts before the AUX MODE
is activated. It can be adjusted from 0 to 24 seconds,
but is rarely required. Pressing the <BACK> soft key
returns to the AUX MODE Diversion: Relay TIME and
VOLT screen.
Press the <VOLT> soft key.
Use this screen to establish the set points for starting
and ending the AUX MODE relative to the Absorb, Float,
and EQ voltages. The < - > and < + > soft keys set the
Diversion set points. The <HYST> (Hysteresis) set point
establishes when the AUX MODE becomes inactive after
the battery voltage falls below the Relative Volts voltage
minus the HYST value. After establishing these values,
press the <BACK> soft key to return to the Diversion:
Relay TIME and VOLT screen.
AUX MODE
Diversion: Relay
EXIT TIME VOLT
Hold Delay
01.0 Time 00
seconds
BACK - + DLY+
AUX MODE
Diversion: Relay
EXIT TIME VOLT
Absorb--Float--EQ
Relative Volts
0.0 00.2
BACK - + HYST
g
g