Filter
Top Products
Maintenance
If any of following occurs, unplug your LCD display and contact your distributor or qualified
technician to repair your LCD display:
Power cord or plug is damaged.
Liquid dropped inside your LCD display.
LCD display is damp or wet.
LCD display is damaged.
LCD display functions abnormally.
Changing parts
If you need to change the parts of your LCD display, please ask the technician for written proof so
as to make sure that the new parts are specified by the manufacturer and the functions are the same
as the original parts.
Safety inspection
After the LCD display is repaired, be sure to ask the technician (in accordance with the manufacturer's
requirements) for routine safety inspection so as to make sure that the LCD display is safe.
If your LCD display has been used longer than its life, please contact qualified technician for repair.
You can find the serial NO. and model on the back of the LCD display. Be sure to provide the model
and serial number when you contact your distributor.
Tips for your LCD display maintenance
User's record
DO NOT repair LCD display by yourself. Once the shell is opened, you are exposed to
high voltage device and face risks.
Please read and comply with all warnings, cautions, and the manual thoroughly.
You might lose your warranty if you modify or revise your LCD display in such a manner
not approved by this manual.
1
2
3
4
5
03
Cautions
Compliance with Canadian rules
This device has been tested and complies with the requirements of Class A/B digital device pursuant
to FCC Rules Part 15. These requirements were set up to provide reasonable protection with respect
to the harmful disturbances for the households where this device is installed. This device affects
radio communication during its production stage and when it is used. Without proper instructions
for installation and use, this device may disturb telecommunication to a certain extent. We cannot
guarantee that any installation method does not affect telecommunication. If you feel that this device
affects the reception of your radio or TV, you can turn on and off the power supply of this device to
determine if this device really affects telecommunication. If yes, you may use following methods
to eliminate the disturbances:
Change the position or direction of your antenna.
Keep your device farther from the receiver.
Plug your device and receiver in separate receptacles.
Contact your distributor or Service Center. (Remark on Warranty Card)
1
2
3
4