Filter
Top Products
43
SOUND Adjustment
1
Display the menu screen.
2
Select “SOUND”.
SET UP
POS. /SIZE
SOUND
PICTURE
2
access
1
select
3
Select the item and set.
2
adjust
1
select
BALANCE
0
1
NORMALIZE
VOLUME
4
Exit the menu.
While the “SOUND” menu is displayed, if the OK button is pressed during “NORMALIZE”, then all adjustment values
are returned to the factory settings.
Helpful Hint (
NORMALIZE
Normalization)
Item Details
BALANCE Adjusts left and right volumes.
VOLUME Adjust the sound volume level.
Item Details
LEFT CHANNEL
CHANNEL 1 to CHANNEL 16
Selects left audio channel.
RIGHT CHANNEL
CHANNEL 1 to CHANNEL 16
Selects right audio channel.
SOUND OUT
ON
OFF
ON: Enables audio output.
OFF: Disables audio output.
LEVEL METER
OFF
1-8CH 9-16CH
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4
channels each on both right and left sides of the display.
OFF: Hides the audio level meter.
1-8CH: Displays the audio level meter (1-8ch)
9-16CH
: Displays the audio level meter (9-16ch)
SDI SOUND OUTPUT
This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board
(TY-FB11DHD) is installed to the unit.
Note:
This menu is available only when selecting a
slot that HD-SDI Terminal Board with audio
(TY-FB10HD) or Dual Link HD-SDI Terminal
Board (TY-FB11DHD) is installed.
CHANNEL 1LEFT CHANNEL
SDI SOUND OUTPUT 2
/
2
CHANNEL 2RIGHT CHANNEL
ONSOUND OUT
OFFLEVEL METER