Filter
Top Products
OPTIONS Adjustments
Item Adjustments
3D Emitter
Set the infrared transmitter for the 3D Eyewear.
INT: Use the infrared transmitter of the unit.
EXT: Use the external 3D IR TRANSMITTER (available separately.)
Function button assign 1
Function button assign 2
Set the function to operate when the FUNCTION button 1 to 2 on the remote control is pressed.
3D settings: The “3D SETTINGS” menu is displayed.
Scrolling bar:
The screen saver activates, and after 15 minutes, the display power shuts down (standby).
Test patterns: The test pattern is displayed by switching among seven patterns.
Blue only: The screen displays only blue color for image adjustment.
Signal:
The “SIGNAL” menu is displayed.
3D Safety Precautions
3D Safety Precautions show/hide is set during power ON.
On: 3D Safety Precaution is shown every time when the power is ON.
Off: 3D Safety Precaution is not shown when the power is ON.
When the setting changes from “On” to “Off”, the confi rmation screen is displayed as below. Pressing
“YES” switches the setting.
YES NO
3D Safety Precautions
If Off is selected, the 3D safety precautions
will not be displayed when power is turned on.
Change Setting?
Memory lock Locks or unlocks saved profi les. Also for setting passwords. (see page 41)
Using FUNCTION button
Pressing the FUNCTION button activates one of the following fi ve functions. The settings of functions are
performed with the “Function button assign 1” and “Function button assign 2” on the OPTIONS menu. (see above)
The factory preset functions are as described below.
FUNCTION 1 Button: 3D SETTINGS
FUNCTION 2 Button: SIGNAL
3D SETTINGS / SIGNAL
The “3D SETTINGS” menu is displayed.
(Example: 3D SETTINGS)
ON3D EYEWEAR
OFF
AUTO
3D INPUT FORMAT
3D SETTINGS
LEFT/RIGHT SWAP
SAFETY PRECAUTIONS
Pressing the FUNCTION button clears the menu.
SCROLLING BAR / TEST PATTERNS / BLUE ONLY
Confi rmation screen (Example: SCROLLING BAR)
YES N O
FUNCTION 1
SCROLLING BAR
SCROLLING BAR
Activates the SCROLLING BAR ONLY screensaver.
After 15 minutes, the display enters standby mode.
To exit this mode, press any button.
BLUE ONLY
The screen displays only blue color for image adjustment.
To exit this mode, press FUNCTION button.
Note:
PC POWER MANAGEMENT and AUTO POWER OFF are deactivated during SCROLLING BAR or TEST PATTERNS operation. (see page 46)
Press to
select
“YES”.
Press.
TEST PATTERNS
Each time you press , a different test pattern is displayed (seven in all).
Color Bars Red Green
Blue
Frame
(2 lines × 2 dots)
Black
1% window
To exit this mode, press any button other than .
The operation starts.
57