Filter
Top Products
AUTOSYNC
1024 ×768
33.7 kHz
60.0 Hz
1125(1080)/60i
XGA MODE
H-FREQ.
V-FREQ.
SIGNAL FORMAT
SIGNAL
[
RGB
]
ONFRAME CREATION
AUTO
33.7 kHz
60.0 Hz
1125(1080)/60i
XGA MODE
H-FREQ.
V-FREQ.
SIGNAL FORMAT
SIGNAL
[
COMPONENT
]
ON3D Y/C FILTER
AUTOCOLOR SYSTEM
SIGNAL
[
VIDEO
]
SIGNAL
[
Digital
]
ON24p SMOOTH FILM
33.7 kHz
60.0 Hz
1125(1080)/60i
H-FREQ.
V-FREQ.
108.0 MHzDOT CLOCK-FREQ.
SIGNAL FORMAT
60Hz3D 24p FILM DISPLAY
AUTOHDMI RANGE
48
Note:
“SIGNAL” setup menu displays a different setting condition for each input signal.
SIGNAL menu
For VIDEO (S VIDEO)
For RGB
For COMPONENT
For Digital
(Example: HDMI input)
SET UP menu
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENT
AUTO POWER OFF OFF
OFF
OFF
OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH
(
US
)
EXTENDED LIFE SETTINGS
SCREENSAVER
NETWORK SETUP
INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
SIGNAL
Input signal display
Displays the frequency and the type of the
current input signal.
This display is valid only for
COMPONENT/RGB/PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.
2
access
1
select
Select the item and set.
2
change
1
select
• 3D Y/C FILTER
This menu is displayed when BNC Dual Video Terminal Board (TY-FB9BD) is installed to the unit.
ON OFF
Note:
When ON, this setting only affects NTSC input signals.
• COLOR SYSTEM
This menu is displayed when BNC Dual Video Terminal Board (TY-FB9BD) is installed to the unit.
AUTO SECAM M.NTSC
NTSCPAL
Set the color system to match the input signal. When “AUTO” is set, COLOR SYSTEM will be automatically selected
from NTSC/PAL/SECAM/M.NTSC.
To display PAL60 signal, select “AUTO” or “PAL”.
If the image becomes unstable:
With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become
unstable. Should this occur, set the system to match the format of the input signal.
• XGA MODE
This menu is displayed when the input signal is analog (Component/PC).
This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling
rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
AUTO 1024×768 1280×768 1366×768
AUTO: Automatically selected from 1024×768/1280×768/1366×768.
Switch the setting to suit the input signal for better display depends on the angle of view or display resolution
condition.
Note:
After making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS. /SIZE” menu as
necessary. (see page 28)