Filter
Top Products
12
The VTR indications shown on the monitor screen are
known as the On Screen Display (OSD).
This VTR allows many settings to be made at the OSD.
Preparation
Á Turn on the VTR and monitor.
Settings Using the On Screen Display
To use the On Screen Display:
OSD Mode
Use the SUPER switch to perform the OSD settings.
Set the OSD displays on the monitor screen which is
connected to OUTPUT1 or 2.
The OSD displays simultaneously appear or do not appear
at OUTPUT1 and 2.
AUTO: The On Screen Display will appear on the monitor
screen for a few seconds when you operate the
VTR.
ON: The On Screen Display will always appear on the
monitor screen when you perform the VTR.
OFF: The On Screen Display will not appear.
POWER EJECT
STEREO
SELECT
AUDIO
OUT
INPUT SELECT
LINE
S-VIDEO
DV
SUPER
AUTO
ONOFF
REC
INHIBIT
DATE DISPLAY
ZERO
STOP
RESET
AUDIO
REC LEVEL
AUDIO MIX
MENU EXIT
REC
STEREO
1
STEREO
2
010
REW STOP PLAY FF
PAUSE
REMOTE
LOCAL
SET
SUPER
AUTO
ONOFF
IN/OUT
DV
e Audio Data Indicator
f Audio Output Mode Indicator
The Left (L) and Right (R) Indicators show which sound
mode is selected with AUDIO OUT (see page 4).
Stereo: Both the AUDIO L and R Indicators appear.
Left: The AUDIO L Indicator appears.
Right: The AUDIO R Indicator appears.
g Time code/Remaining tape time/Tape counter
Time code TC 0:09:46:00
Remaining tape time REMAIN 1:16
Tape counter p1:35.47
h Tape running display
Stop
Playback PLAYE
Still Playback STILL
Fast Forward/Rewind FFD/REWC
Cue/Review CUED/REVC
Slow Playback SLOW
Recording/Recording Pause RECE/REC PAU
i External Input Indicator
j Tape speed Indicator
k Index Indicator
Notes:
Á When the “SUPER” switch is set to OFF, the On Screen
Display will not appear.
Á On Screen Display is not displayed when the MENU
screen is displayed.
AUDIO
1
2
34 5
0
:
09
:
46:00 SP
INDEX
12bi t
L R REC DV
TC