Panasonic AG-DV1000P VCR User Manual


  Open as PDF
of 20
 
15
Audio Displays on Unit’s Display Area
Audio Monitor Display
ST1 display:
This lights when STEREO1 was selected while playback
was underway.
ST2 display:
This lights when STEREO2 was selected while playback
was underway.
When STEREO1i2 (MIX) audio is selected, STEREO2
appears on the display.
Audio Recording Data Display
16bit display:
This lights while a tape containing a 16-bit audio recording
is being played back.
ST1 display:
This lights while a tape containing a 12-bit audio recording
is being played back.
ST2 display:
This lights while a tape containing a 12-bit audio recording
on the STEREO2 track is being played back.
AUDIO Mode
1 Press MENU and select OPTION SETUP2 using W or
X, and then press SET.
2 Select AUDIO MODE using W or X, and then press
SET.
3 Select 12bit or 16bit using O or N, and then press SET.
12bit: Divides the audio area into two stereo audio
tracks, STEREO1 and STEREO2.
³ If a recording is made in 12bit audio mode, the
sound is recorded on STEREO1 only, and is
not recorded on STEREO2.
16bit: Uses the entire audio area in order to record
audio with greater quality.
4 Press EXIT to exit the On Screen Display.
³ When DV has been selected as the INPUT SELECT
setting, 12 bits or 16 bits—whichever number is in line
with the signals sent to the DV connector—are
automatically selected regardless of the AUDIO MODE
setting.
MENU
SET
MENU
OPTION SETUP1
OPTION SETUP2
OPTION INITIAL
HOUR METER
:
SELECT
SET
:
ACCESS
MENU
:
LEAVE MENU
OPTION SET UP 2
3D Y/C MODE
3D NR MODE
COLOR MODE
AUDIO MODE
TAPE SPEED
:
SELECT
SET
:
ACCESS
MENU
:
RETURN
SET
SET
AUDIO MODE
:
SELECT
SET
:
ACCESS
MENU
:
RETURN
12bi t 16bit
Audio Level Display
16bit
ST1 2
ST1 2
dB
30 20 10 5 0
OVER
-
L
R
POWER EJECT
STEREO
SELECT
AUDIO
OUT
INPUT SELECT
LINE
S-VIDEO
DV
SUPER
AUTO
ONOFF
REC
INHIBIT
DATE DISPLAY
ZERO
STOP
RESET
AUDIO
REC LEVEL
AUDIO MIX
MENU EXIT
REC
STEREO
1
STEREO
2
010
REW STOP PLAY FF
PAUSE
REMOTE
LOCAL
SET
IN/OUT
DV
Audio Monitor Display
Audio Recording
Data Display
Settings Using the On Screen Display
 previous next