Panasonic AG-DV1000P VCR User Manual


  Open as PDF
of 20
 
13
3 Select OFF or S1 using | or {, and then press SET.
OFF: Normal mode.
S1: When the S-Video input socket on the monitor
that is connected is an S1-Video socket.
(If a wide mode video signal is sent to the
monitor, the monitor screen size will
automatically switch to wide mode.)
4 Press EXIT to exit the On Screen Display.
INPUT TBC Mode
1 Press MENU, and select OPTION SETUP1 using Y or
Z, and then press SET.
2 Select INPUT TBC using Y or Z, and then press SET.
3 Select ON or OFF using | or {, and then press SET.
OFF: Set to this position when the dubbed images were
disturbed at the ON position.
ON: At this position, the subtle shaking and distortion
of the pictures are suppressed when a cassette
tape which was recorded using another camera or
VTR is dubbed on this unit.
4 Press EXIT to exit the On Screen Display.
Note:
The INPUT TBC function does not work for signals from a
DV input.
POWER SAVE Mode
1 Press MENU and select OPTION SETUP1 using Y or
Z, and then press SET.
2 Select POWER SAVE MODE using Y or Z, and then
press SET.
3 Select OFF, 2H or 6H using | or {, and then press
SET.
OFF: This setting does not conserve power when the
VTR is off.
2H: The VTR turns off automatically if no operation is
performed for approximately two hours.
6H: The VTR turns off automatically if no operation is
performed for approximately six hours.
4 Press EXIT to exit the On Screen Display.
WIDE Mode
1 Press MENU and select OPTION SETUP1 using Y or
Z, and then press SET.
2 Select WIDE MODE using Y or Z, and then press SET.
On Screen Display
MENU
OPTION SETUP1
OPTION SETUP2
OPTION INITIAL
HOUR METER
:
SELECT
SET
:
ACCESS
MENU
:
LEAVE MENU
MENU
SET
OPTION SET UP 1
POWER SAVE MODE
WIDE MODE
INPUT TBC
:
SELECT
SET
:
ACCESS
MENU
:
RETURN
SET
SET
POWER SAVE MODE
OFF 2H 6H
:
SELECT
SET
:
ACCESS
MENU
:
RETURN
MENU
SET
MENU
OPTION SETUP1
OPTION SETUP2
OPTION INITIAL
HOUR METER
:
SELECT
SET
:
ACCESS
MENU
:
LEAVE MENU
OPTION SET UP 1
POWER SAVE MODE
WIDE MODE
INPUT TBC
:
SELECT
SET
:
ACCESS
MENU
:
RETURN
SET
SET
WIDE MODE
OFF S1
:
SELECT
SET
:
ACCESS
MENU
:
RETURN
MENU
SET
MENU
OPTION SETUP1
OPTION SETUP2
OPTION INITIAL
HOUR METER
:
SELECT
SET
:
ACCESS
MENU
:
LEAVE MENU
OPTION SET UP 1
POWER SAVE MODE
WIDE MODE
INPUT TBC
:
SELECT
SET
:
ACCESS
MENU
:
RETURN
SET
SET
INPUT TBC
OFF ON
:
SELECT
SET
:
ACCESS
MENU
:
RETURN
Settings Using the On Screen Display
 previous next