Panasonic BDP-440 Blu-ray Player User Manual


 
47
En
07
5 Select and set Start.
Press ENTER.
6 Downloading of the software start.
The software download status is displayed on the screen.
Depending on the Internet connection conditions,
software downloading may take a certain period of
time.
7 Updating starts.
Software updating may take a certain period of time.
8 Updating completes.
This unit automatically restarts.
Updating using a USB memory
device/disc
Note
When an update file is provided on the Pioneer
website, use your computer to download it onto a
USB memory device or disc. Carefully read the
instructions on downloading update files provided on
the Pioneer website.
Store the update file in the root directory of the USB
memory device or disc. Do not store it within a folder.
Do not put any files other than the update file on the
USB memory device or disc.
To update using a disc, use a CD-R or CD-RW disc.
The player supports USB memory devices formatted
in FAT32/16. When formatting a USB memory device
on your computer, do so with the settings below.
File system: FAT32
Allocation unit size: Default allocation size
Only store the most recent update file on the USB
memory device or disc.
Do not use a USB extension cable to connect a USB
memory device to the player. Using a USB extension
cable may prevent the player from performing
correctly.
•Steps 1 to
5 are the operations performed by the user.
•Steps 6 to
7 are the operations performed
(automatically) by the player (they are intended to
update the software).
1 Plug in the USB memory device or load the disc on
which the update file is stored.
2 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
3 Select and set Initial Setup.
Use / to select, then press ENTER.
4 Select and set Options Update Disc or USB
Storage Start.
Use / to select, then press ENTER.
5 Select and set Yes.
Use /// to select Yes, then press ENTER.
6 Updating starts.
Software updating may take a certain period of time.
7 Updating completes.
Restoring all the settings to
the factory default settings
1 Check that the player’s power is turned on.
2 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
3 Select and set Initial Setup.
Use / to select, then press ENTER.
4 Select and set Options Load Default Next
Screen.
Use / to select, then press ENTER.
5 Select and set OK.
Use / to select, then press ENTER.
Note
After restoring all the settings to the factory default
settings, use Setup Navigator to reset the player
(page 23).
When all the settings are restored to the factory
defaults, all the data for the secondary video (Picture-
in-Picture), secondary audio, bookmarks, etc., is
erased.
BDP-140_VXCN5_IBD_EN.book Page 47 Wednesday, September 28, 2011 9:52 AM