Filter
Top Products
16
• Use the menu to open and set up functions.
• When “FUNCTION DISPLAY” ( page 32) is set to
ON, press any of the "FUNCTION1" to "FUNCTION5"
buttons to display the functions assigned to
FUNCTION buttons.
• This display disappears after 2 seconds of inaction.
• “XXXXX” indicates operating status ( page 34,
“Functions displayed during FUNCTION button
operation”).
• A white skeleton bar meter indicates the audio level
for SDI signals.
• You can switch the level display on/off and set the
number of displayed channels using the menu
( page 38, “AUDIO”).
• The 0 dB line and channel display can be switched
on/off from the menu ( page 38, “AUDIO”).
• This is the menu display.
• It disappears after 2 minutes of inaction.
• You can change position of the display ( page 29,
“MENU POSITION”).
FUNCTION display
F1:MARKER
F2:WFM/VECTOR
F3:TWO WINDOW
F4:TIME CODE
F5:LEVEL METER
XXXXX
Audio level meter display
11
33
55
77
22
44
66
88
Channel
display
Level
display
0 dB line
Menu display
[MAIN MENU]
Displays instructions on menu
button operations.
How to Use the On Screen Menu (continued)