Filter
Top Products
5
VQT2H83
Getting started
Control reference guide
1 Turn the unit on and off (> 12)
2 TV operation buttons (> 14)
You can operate the TV through the unit’s remote control.
[Í TV] : Turn the television on and off
[AV] : Switch the input select
[ijVOL] : Adjust the volume
[WXCH] : Channel select
3 Select title numbers, etc./Enter numbers or characters
(> 23)
[CANCEL] : Cancel
4 Show playback menu (> 26)
5 Switch on/off Secondary Video (Picture-in-picture) (> 18)
6 Basic playback control buttons (> 16)
7 Show status messages (> 16)
8 Show Pop-up menu (> 16)
9 Show Top menu/DIRECT NAVIGATOR (> 16)
10 Show OPTION menu (> 17)
11 Coloured buttons (red, green, yellow, blue)
These buttons are used when;
≥ Operating a BD-Video disc that includes Java
TM
applications (BD-J).
≥ Displaying “Title View” and “Album View” screens.
(> 20)
≥ Operating contents of VIERA CAST. (> 23)
12 Transmit the remote control signal
13 Open or close the disc tray (> 15)
CAUTION
Do not place objects in front of the unit. The disc tray may
collide with objects when it is opened, and this may cause
injury.
14 Adjust the volume of an amplifier/receiver.(> 14)
15 Select audio (> 16)
16 Reproduce more natural audio (> 17)
17 Select drive (BD/DVD/CD, SD card or USB device)
(> 15)
18 Displays the Home screen of the VIERA CAST (> 23)
19 Exit the menu screen
20 Show FUNCTION menu (> 15)
21 Selection/OK, Frame-by-frame (> 16)
22 Return to previous screen
1
2
3
4
5
6
7
9
8
11
10
19
18
22
21
20
15
16
17
14
13
12
SD CARD
SD CARD
1 72 3
8 9 10
5 64
Pull to flip down
the front panel.
1 Standby/on switch (Í/I) (> 12)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2 Display
The indicator blinks when reading data from a disc, a card
or a USB device, or writing data to a card.
3 Disc tray (> 15)
4 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and right
5Stop (> 16)
6 Start play (> 16)
7 Open or close the disc tray (> 15)
8 SD Card LED
≥ It is possible to set the LED to turn on/off. (> 30)
9SD card slot (> 15)
10 USB port (> 15)
≥ There is another port at the back of the main unit.
Two USB ports cannot be used simultaneously.
[For[Australia[and[New[Zealand]
USB ports can be used simultaneously only with the
supplied Wireless LAN Adaptor (> 10).
Rear panel terminals (> 8–11)
Disc indicator SD card indicator
USB device
indicator
DMP-BD85GN&GA&GC-VQT2H83_eng.book 5 ページ ２０１０年２月５日 金曜日 午後１２時３９分