Filter
Top Products
9
VQT2H83
Connections and settings
STEP 2 : Connecting to an amplifier/receiver
Digital Audio Analogue Audio
∫ Via an HDMI AV OUT terminal ∫ Via a COAXIAL or OPTICAL
terminal
∫ Via a 5.1/7.1ch AUDIO OUT
terminal
≥ The HDMI connection supports
VIERA Link “HDAVI Control” (> 22)
when used with a compatible
Panasonic TV.
≥ Set “HDMI Video Mode” and “HDMI
Audio Output” to “On” (> 30).
≥ Set “Digital Audio Output” depending
on the used terminal and connected
amplifier/receiver (> 29).
≥ When connecting a TV (> 8) with
HDMI AV OUT terminal, set “HDMI
Audio Output” to “Off” (> 30).
≥ Set “Digital Audio Output” depending
on the used terminal and connected
amplifier/receiver (> 29).
Cable connections
a Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
b Front speaker (L/R)
c Surround speaker (L/R)
d Subwoofer
e Centre speaker
≥ Set “Analog Audio Output” to “7.1ch”
or “2ch (Downmix) + 5.1ch”,
depending on the used terminal
(> 30).
≥ You can set the “Analog Audio
Output” from the “Easy Setting”
(> 12).
≥ When connecting equipment with
HDMI AV OUT terminal, set “HDMI
Audio Output” to “Off” (> 30).
HDMI IN
HDMI IN
HDMI IN
HDMI OUT
Multi channel
speakers
Amplifier/receiver
HDMI cable
HDMI cable
COAXIAL IN
OPTICAL IN
Amplifier/receiver
Coaxial
cable
Optical
cable
OR
Connect Audio cables to
terminals corresponding
to the speakers you have
connected.
Multi channel speakers
Amplifier/receiver
DMP-BD85GN&GA&GC-VQT2H83_eng.book 9 ページ ２０１０年２月５日 金曜日 午後１２時３９分