Filter
Top Products
39
VQT2J87 (ENG)
Reference
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the items.
Press [SETUP] > “Audio” > Set each item
For details of the each item, refer to page 31.
Recommended audio output setting
Example of connected equipment
TV via HDMI
*1
Receiver with
HD
audio
*2
decoder via
HDMI
Receiver without
HD
audio
*2
decoder via
HDMI
Receiver via
COAXIAL or
OPTICAL
Receiver
via analog output
*3
Setup menu
“Digital
Audio
Output”
“Dolby D/Dolby
D +/Dolby
TrueHD”
“PCM” “Bitstream
” “PCM” “PCM” No effect
“DTS/DTS-HD” “PCM” “Bitstream” “PCM” “PCM” No effect
“BD-Video
Secondary
Audio”
“Off” “Off” “Off” “Off” “Off”
“PCM Down Conversion” No effect No effect No effect
“Off
”
*4
No effect
“Downmix” “Stereo” No effect No effect
“Stereo
”
*5
No effect
“High Clarity Sound” “Enable”
“Disable
”
*6
“Disable”
*6
“Disable”
*6
“Disable”
*6
≥ Because underlined items are the factory presets, it is not necessary to change these settings.
*1
If connected to TV via the COAXIAL, OPTICAL or AUDIO OUT terminal, these settings have no effect.
*2
HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
*3
Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”. (Press [SETUP] > TV / Device Connection)
*4
If the connected equipment that does not support 96 kHz, set to “On”.
*5
If the connected equipment that supports the virtual surround function, set to “Surround encoded”.
*6
When connected to TV via the HDMI terminal for outputting image, set to “Enable”.
DMP-BDT300_VQT2J87_eng.book 39 ページ ２０１０年１月２６日 火曜日 午後１時５２分