Filter
Top Products
8
VQT2J87(ENG)
STEP 1 : Connecting to a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you temporarily
disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder. Due
to copy guard protection the picture may not be displayed
properly.
≥ Refer to page 39, about recommended settings for each
piece of connected equipment.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters (16.4 ft) or less.
Recommended part number:
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
∫ Via an HDMI MAIN AV OUT terminal
– It is possible to playback 3D videos by connecting this
unit with a 3D compatible TV.
≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
(> 32).
≥ The HDMI connection using HDMI MAIN AV OUT supports
VIERA Link “HDAVI Control” (> 27).
Highest Quality
(VIDEO)
HDMI IN
HDMI cable
DMP-BDT300_VQT2J87_eng.book 8 ページ ２０１０年１月１８日 月曜日 午後５時２７分