Filter
Top Products
24
RQT9274
Advanced timer recording
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
≥You can enter up to 32 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
[RAM] [-RW‹V›] [+R] [+RW]
≥To use a new disc, formatting is necessary.
Preparation
≥Turn on the television and select the appropriate AV input to suit
the connections to this unit.
≥
If recording to DVD, insert a disc that you can use for recording (
>
15
).
≥Make sure that the clock settings are correct (> 61).
1 Press [PROG/CHECK].
2 Press [3, 4] to select “New Timer
Programme” and press [OK].
3 Press [1] to move through the items
and change the items with [3, 4].
≥Press and hold [3, 4] to alter the Start (Start time) and Stop
(Finish time) in 30-minute increments.
≥You can also set Channel (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥Date
Titles recorded using the same daily or weekly timer are
bundled and displayed as a “group” in the
DIRECT NAVIGATOR screen (> 27) except when using
Auto Renewal Recording.
≥You can also press [DRIVE SELECT] to select the recording
drive.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (> 25, Relief Recording).
≥You can also press [REC MODE] to change the recording
mode.
≥[HDD] RENEW (Auto Renewal Recording) (> 25)
ON!)OFF
≥Programme Name
Press [2, 1] to select “Programme Name” and press [OK].
(> 42, Entering text)
4 Press [OK].
The timer programme is stored and the timer icon is
displayed.
“F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 2–4 to programme other recordings.
Press [Í] to turn the unit off.
1 While the unit is on
Press [∫].
2 Press [2, 1] to select “Stop
Recording” and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly or daily timer recording, the recording
will start from the next time the timer recording is set.
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
1 Press [PROG/CHECK].
2 Press [3, 4] to select the programme
and press the “Red” button.
≥The timer icon “F” (> 25) disappears from the timer
recording list.
≥You cannot cancel timer recording standby mode as long as
even one timer icon “F” (> 25) remains in the timer
recording list.
≥Press the “Red” button again to activate timer recording
standby.
≥When a timer recording is set, DVDs that were recorded using a
different TV system cannot be played unless the TV system is
changed in the Setup menu (> 60) or the timer recording has
completed or has been cancelled.
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing.
≥Timer recordings do not begin while editing or copying in normal
speed mode (> 43).
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
≥If the actual broadcasting times of timer recordings overlap, the
recording that starts first always has priority, and the recording of
the later programme will start only after the first timer recording has
finished.
Manually programming timer
recordings
[.
l
l
l
l
a.
Date: Current date up to one month later minus
one day
;:
Daily timer: SUN-SAT>MON-SAT>MON-FRI
;:
Weekly timer: SUN>--->SAT
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
TUE 18.08.09. 12:53:00
Mode
Stop Start
No.
Date
HDD
DVD
HDD
Channel
Drive
space
SP
OK
20:00
19:00
ARD
15. 7. TUE
01
New Timer Programme
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
TUE 18.08.09. 12:54:00
Mode
Stop Start Channel Date
HDD
DVD
22:30 22:00 25. 8. TUE HDD
1 ARD
Programme Name
SP
No.
Channel
ARD
01
Timer icon
TUE
18.08.09
12:56:00
Mode
Stop
HDD
DVD
HDD
Drive
space
SP
OK
20:00
Programme
Check to make sure “OK”
is displayed (> 25).
To cancel recording when recording
has already begun
To release the unit from recording
standby
Notes on timer recording
Stop Recording
Stop Recording
Cancel
Timer recording in progress.
Stop this timer recording?
It will be cancelled if you stop.
OK
RETURN
SELECT
Programme
Programme
Recorded Recorded
Not recorded
EH59GN-RQT9274-L_eng.book 24 ページ ２００９年２月１６日 月曜日 午後６時４９分