Panasonic DMR EH69 DVR User Manual


 
74
RQT9274
Cannot display DIRECT NAVIGATOR screen.
¾ This screen cannot be displayed during recording or copy.
Cannot edit or format a card. ([EH69])
¾ Release the card’s protection setting. (With some cards, the
“Write Protection Off” message sometimes appears on the
screen even when protection has been set.) (> 54)
The contents of the card cannot be read. ([EH69])
¾ Remove the card from the slot and then insert again. If this
does not solve the problem, turn off and turn on the unit again.
¾ The card format is not compatible with the unit. (The contents
on the card may be damaged.)
This unit is compatible with SD Memory Cards that meet SD
Card Specifications FAT12 and FAT16 formats, as well as
SDHC Memory Cards in FAT32 format. (> 13, 14)
¾ The card contains a folder structure and/or file extensions that
are not compatible with this unit. (> 13)
¾ You can use SD Memory Cards with capacities from 8 MB to 2
GB and SDHC Memory Cards with capacities from 4 GB to
32 GB.
¾ This unit cannot play AVCHD format motion pictures or MPEG4
on an SD card.
Copying, deleting and setting protection takes a
long time. ([EH69])
¾ When there are a lot of folders and files, it may sometimes take
a few hours.
¾ When repeating copying or deleting, it may sometimes take a
long time. Format the disc or card. (> 55)
Still pictures (JPEG) do not playback normally.
¾ The images that were edited on the PC, such as Progressive
JPEG etc., may not playback. (> 14)
The contents of the USB memory cannot be read.
¾ Remove the USB memory from the USB port and then insert
again. If this does not solve the problem, turn off and turn on the
unit again.
¾ Check that the USB memory is inserted correctly. (> 15)
¾ The format of the USB memory or of its contents is not
compatible with the unit. (The contents on the USB memory
may be damaged.) (> 13, 14)
¾ The USB memory contains a folder structure and/or file
extensions that are not compatible with this unit. (> 14)
¾ Turn off and then turn on the unit again.
¾ USB memories connected using a USB extension cable or a
USB hub may not be recognized by this unit.
¾ Some USB memories cannot be used with this unit. (> 13)
¾ If inserted during playback, recording or copying etc., the USB
memory may not be recognized by this unit.
VIERA Link doesn’t work.
¾ Check the HDMI cable connection. Check that “HDMI” is
displayed on the front display when the power for the main unit
is set to On.
¾ Make sure that “VIERA Link” is set to “On”. (> 60)
¾ Check the “HDAVI Control” settings on the connected device.
¾ Some functions may not work depending on the version of
“HDAVI Control” of the connected equipment. This unit supports
“HDAVI Control 4” functions.
¾ If the connection for the equipment connected with HDMI was
changed, or if there was a power failure or the plug was
removed from the household mains socket, “HDAVI Control”
may not work.
In this case, perform the following operations.
1 When the HDMI cable is connected to all equipment with the
power on, turn the TV (VIERA) on again.
2 Change the TV (VIERA) settings for the “HDAVI Control”
function to off, and then set to on again. (For more
information, see the VIERA operating instructions.)
3 Switch the VIERA input to HDMI connection with this unit,
and after this unit’s screen is displayed check that “HDAVI
Control” is working.
The operation on this unit (music playback etc.)
is interrupted.
¾ The operation on this unit may be interrupted when you press
buttons on the TV remote control that do not work for VIERA
Link functions.
To return all the settings other than the main ones
to the factory preset
¾ Select “Yes” in “Shipping Condition” in the Setup menu. All the
settings except for the ratings level, ratings password and clock
settings return to the factory preset. The timer recording
programmes are also cancelled. (> 61)
¾ Select “Yes” in “Default Settings” in the Setup menu. All the
settings other than the tuning settings, clock settings, country
settings
§
, disc language settings, ratings level, ratings
password, remote control code, return to the factory presets.
The timer recording programmes are also cancelled. (> 61)
¾ Press and hold [X CH] and [CH W] on the main unit until the
country setting screen
§
or the Auto-Setup screen appears. All
the settings except for the ratings level, ratings password and
clock settings return to the factory preset. The timer recording
programmes are also cancelled.
§
Only for New Zealand.
To reset the ratings level settings
¾ While the disc tray is open, press [DRIVE SELECT] to select
the DVD drive, then press and hold [¥ REC] and [1](PLAY) on
the main unit at the same time for 5 or more seconds.
To restore the unit if it freezes due to one of the
safety devices being activated
¾ Press and hold [Í/I] on the main unit for 10 seconds. (The
settings remain.)
Still pictures
USB
VIERA Link
To reset this unit
EH59GN-RQT9274-L_eng.book 74 ページ 2009年2月16日 月曜日 午後6時49分