Filter
Top Products
95
RQT9429
Reference
Additional connections
Connecting a television with S VIDEO
terminals
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
This unit’s rear panel
S Video
cable
Audio cable
Television’s rear panel
OUT
O
UTN
PR
P
B
Y
O
NENT
O
OUT
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
S VIDEO
IN
AUDIO I N
R L
V IDEO
I N
Connecting a television with
COMPONENT VIDEO terminals
OPTICAL
COAXIAL
OUTO
UT
A
V4 IN
A
V4 IN
S VIDEOVIDEO
R-AUDIO-L
PR
P
B
Y
10BASE-T/
100BASE-TX
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
R- L
AUDIO IN
R L
P
R
P
B
Y
COMPONENT
VIDEO IN
Television’s rear panel
This unit’s rear
panel
Component
video cable
Audio cable
COMPONENT VIDEO terminals can be used for either interlace or
progressive output (➡ 114) and provide a purer picture than the S
VIDEO OUT terminal.
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
Required setting
“Component Resolution” setting in the Setup menu (➡ 89)
If you have a regular television (CRT: cathode ray tube)
Progressive output may cause some fl ickering, even if it is
progressive compatible. Set “Component Resolution” in the Setup
menu to “576i/480i” and “HDMI Video Mode” to “Off” if you are
concerned about it (➡ 89). This is the same for multi system
televisions using PAL mode.
Progressive output
DO NOT
CRT
COMPONENT
VIDEO OUT
This unit
COMPONENT
VIDEO IN
Connecting a stereo amplifi er
Connect to terminals of the same colour.
Supplied Audio/Video cable can also be used as an alternative for
Audio cable without connecting the video connector (yellow).
AUDIO I N
R L
OUT
O
UT
A
V4 IN
A
V4 IN
S VIDEOVIDEO
R-AUDIO-L
PR
P
B
Y
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
Amplifi er’s rear panel
Audio cable
This unit’s rear panel
Connecting an amplifi er with a digital
input terminal
Required setting
“Digital Audio Output” in the Setup menu (➡ 87)
When this unit is connected to an amplifi er with an optical digital
audio cable or coaxial cable and connected to a television with an
HDMI cable, you can enjoy the highest quality of audio from the
disc by setting “HDMI Audio Output” to “Off” in the Setup menu
(➡ 89). In this case audio is only output from the amplifi er not the
television.
Before purchasing an optical digital audio cable (not included),
check the terminal shape of the connected equipment.
■ With OPTICAL
You cannot use DTS Digital Surround decoders not suited to DVD.
OPTICAL IN
OPTICAL
COAXIAL
S VIDEOVIDEO
P
B
Y
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
Insert fully with
this side up.
Amplifi er’s rear panel
Optical digital audio cable
Do not bend sharply when
connecting.
This unit’s rear panel
■ With COAXIAL
OPTICAL
COAXIAL
S VIDEOVIDEO
O
-L
P
B
Y
DIGITAL
AUDIO OUT
(PCM/
BITSTREAM)
COAXIAL IN
Amplifi er’s rear panel
This unit’s rear panel
Coaxial cable
Leave “Yellow” unconnected.
Convenient
functions
DMR-XW450_GL_en.indb 95DMR-XW450_GL_en.indb 95 2009/04/08 午前 10:06:512009/04/08 午前 10:06:51