Filter
Top Products
21
CH DATE ON OFF
2 27WE 20:02 21:30 SP
25 SU-SA10:30 11:00 A
14 SU 15:00 16:00 SP
5 19TU 22:15 23:30 EP
A2 28TH 20:02 21:30 SP
4 30SA 19:10 19:55 EP
–– –––– ––:–– ––:––
–– –––– ––:–– ––:––
END:MENU
1
2
3
4
5
6
7
8
CH DATE ON OFF
2 27WE 20:02 21:30 SP
25 SU-SA10:30 11:00 A
14 SU 15:00 16:00 SP
5 19TU 22:15 23:30 EP
A2 28TH 20:02 21:30 SP
4 30SA 19:10 19:55 EP
–– –––– ––:–– ––:––
–– –––– ––:–– ––:––
END:MENU
1
2
3
4
5
6
7
8
CH DATE ON OFF
2 27WE 20:02 21:30 SP
25 SU-SA10:30 11:00 A
14 SU 15:00 16:00 SP
5 19TU 22:15 23:30 EP
A2 28TH 20:02 21:30 SP
4 30SA 19:10 19:55 EP
–– –––– ––:–– ––:––
–– –––– ––:–– ––:––
END:MENU
1
2
3
4
5
6
7
8
CH DATE ON OFF
2 27WE 20:02 21:30 SP
25 SU-SA10:30 11:00 A
14 SU 15:00 16:00 SP
–– –––– ––:–– ––:––EP
A2 28TH 20:02 21:30 SP
4 30SA 19:10 19:55 EP
–– –––– ––:–– ––:––
–– –––– ––:–– ––:––
END:MENU
1
2
3
4
5
6
7
8
CH DATE ON OFF
2 27WE 20:02 21:30
25 SU-SA10:30 11:00
14 SU 15:00 16:00
5 19TU 22:15 23:30
A2 28TH 20:02 21:30
4 30SA 19:10 19:55
–– –––– ––:–– ––:––
–– –––– ––:–– ––:––
END:MENU
1
2
3
4
5
6
7
8
Checking a Timer Programme
– The VCR must be turned on, or in timer recording standby
mode.
– Confirm that the TV is on and the VCR viewing channel is
selected.
1 Press the PROG./CHECK button <
twice.
– Every time you press the PROG./
CHECK button <, the programme
shifts below.
2 Press the Cursor button (1) S to
display the Category. (When [JET
NAVIGATOR] is set to [ON].) Press
the Cursor button (1) S again to
make the previous display appear.
3 Press the MENU button U to exit
the On Screen Display.
Cancelling a Timer Programme
– The VCR must be turned on, or in timer recording standby
mode.
– Confirm that the TV is on and the VCR viewing channel is
selected.
1 Press the PROG./CHECK button <
twice.
2 Press the PROG./CHECK button <
repeatedly until the desired timer
programme number flashes on and
off.
3 Press the CANCEL button ;.
4 Press the MENU button U to exit
the On Screen Display.
Note:
– If timer recording is not completed (due to insufficient tape
or cancellation by the user), the programmed timer
recording data will be cancelled from the memory by
4 A.M two days later.
However, if the timer recording function is activated at that
time, the programmed timer recording data will not be
cancelled.
On Screen Display