Filter
Top Products
4
1 POWER button
2 Numeric buttons
To select the programme positions (1–99).
Example:
09:
19:
To enter a G-Code number.
To enter numbers for various settings.
3 AV button
4 NAVI button
5 PICTURE MODE button
6 SEARCH button
7 Play button
8 Rewind button
9 Channel button
: DATE button
; CANCEL button
< PROG./CHECK button
= RESET button
To reset the tape counter (elapsed time) to [0:00.00].
– The tape counter is automatically reset to [0:00.00]
when a video cassette is inserted.
> DISPLAY button
? AUDIO button
@ VCR/TV button
A TIMER (REC) button
B SPEED button
C OFF button
D ON button
E VCR/TV switch
F Stop button
G Fast Forward button
H G-CODE/SV button
I REC button
J Pause/Slow button
K INPUT SELECT button
L INDEX button
M VOLUME button
N Channel button
O REPEAT button
P OSD button
Q DIRECT REC button
R Infra-red transmitter
S Cursor buttons
T OK button
U MENU button
1
9
9
V Child Lock Function buttons
(Convenient function to prevent unauthorized use)
This function deactivates all buttons on the VCR and the
remote control. Use this function, when you do not want
other people to operate the VCR.
To Activate the Child Lock Function:
1 Hold down the OK and the OFF (i) buttons V
simultaneously until the [!" hold] indication appears
in the VCR display.
– If you press a button while the Child Lock function is on,
the [!" hold] indication appears in the VCR display to
inform you that no operation is possible.
To Cancel the Child Lock Function:
1 Hold down the OK and the OFF (i) buttons V
simultaneously until the [!" hold] indication
disappears.
W Cassette compartment
X EJECT button
Y VIDEO IN (AV2)
Z AUDIO IN (AV2)
[ PAUSE/STILL button
\ A.DUB button
] Infra-red Remote Control Receiver window
^ CVC indicator
The crystal view control function ensure that you always
obtain the optimum picture quality so that you get the best
picture automatically.
While the VCR is turned on, the CVC indication ^ is
always displayed to show that the Crystal View Control is
activated.
_ VCR display
` REC/OTR button
a VIDEO IN socket
b VIDEO OUT socket
c AUDIO IN socket
d AUDIO OUT socket
e RF IN socket
f RF OUT socket
Note:
You can use the POWER 1°
1
, Numeric 2°
2
, AV 3°
3
,
VOLUME M°
4
and Channel N°
5
button for your TV operation.
– Set the VCR/TV switch E to [TV].
°
1
To switch the TV on from standby mode (OFF) or vice
versa.
On some TVs it is only possible to switch the TV to
standby mode (OFF) with this button, but not on. In this
case, try to turn the TV on with one of the following
buttons:
Numeric buttons 2
AV button 3
Channel button N
°
2
To select the programme positions (1–99) on the TV.
°
3
To select desired AV input on the TV.
°
4
To adjust the volume of the TV.
°
5
To select the desired programme position (TV station) on
the TV.