Filter
Top Products
24
CH 2
10/27. SA
ON 20:02
Eraced
Programme 1 Programme 2
New programme
Within 10 minutes in the EP mode
Programme 3
Eraced
Programme 1 Programme 2
New programme
Within 10 minutes in the EP mode
Programme 3
Eraced
Programme 1 Programme 2
New programme
10 minutes or more in the EP mode
Programme 3
On Screen Display
When Recording Over the Same Location on a Tape:
– The originally recorded programme is deleted from the list.
– Programme contents starting near the start and end of the
newly recorded programme (within 10 minutes before the
start and after the end of the newly recorded programme in
the EP mode) are also erased.
(Although old programme contents are also similarly
erased in the case of ordinary recording, the newly
recorded programme is not registered in the list.)
To Demonstrate the Jet Navigator Function
Keep the NAVI button 4 pressed for more than 5 seconds
without inserting a cassette tape.
To Check the Recorded Programming Data
(Time Stamp Function)
When playback starts after searching
with Jet Navigator function or index
search function, recorded
programming data (called Time
Stamp) appears on the TV screen for
approx. 5 seconds.
Preparation
– Display the VCR picture on the TV.
Note:
– Time Stamp does not appear if the beginning of the Jet
Navigator data are not recorded 10 minutes before and
after the current tape position in the EP mode even when
index signals are recorded.