Filter
Top Products
Picture
Picturedistortedduringsearch. •Thepicturewillbe somewhat distorted at times: This is normal.
No picture. •Ensure that the equipment is connected properly. O
• Make sure the television is on.
• Ensure the television's video input setting (e.g., VIDEO t) is correct.
The picture shown on the =Go to the Video menu in the ACTION screen, and change "TV Aspect" to suit your television.
television is not normal. You may also need to change the screen mode on the television itself. O
(The sides of the picture are cut =Ensure that the unit is connected directly to the television, and is not connected through a video
off or black hands appear at the cassette recorder.
top and bottom of the screen.)
Displays
=You inserted a disc the unit cannot play; insert one it can. O
eGo to the Display menu in the ACTION screen, and select "On" for "On-Screen Messages". _)
• Press [A,Y] while the rightmost icon is highlighted to move them down. _)
• Go to the Disc menu in the ACTION screen, and select the preferred language for "Menus". _)
eMenus are only displayed if they are recorded on the disc.
• Disc is dirty. Wipe the disc clean. O
J
"NO PLAY" appears on the unit's
display.
No on-screen display.
On-Screen Menu Icons not
displayed or only partially
displayed on the television.
The disc's menu is displayed in a
different language.
No menu play.
"CHECK THE DISC" appears on
the unit's display.
"HE_D" appears on the unit's
display.
El[] stands for a number.
eTrouble is likely to have occurred. The number following "H" depends on the status of the unit.
Reset procedure:
Press [POWER _O/I] to switch the unit to the standby mode and then back to ON. Alternatively,
press [POWER (_)/I] to switch the unit to the standby mode, disconnect the AC power supply
cord, and then reconnect it.
elf the service numbers fail to clear, note the service number and contact a qualified service
person.
"NO DISC" appears on the unit's •You haven't inserted a disc; insert one.
display. •You haven't inserted the disc correctly; insert it correctly.
Product Service
Do not attempt to remove the cover(s) or repair the unit yourself. Refer servicing to qualified personnel only.
I Product information I
For product service, product information or assistance with product operation, refer to the servicenter directory.
Maintenance
i
To clean this unit, wipe with a soft, dry cloth.
It the surfaces are extremely dirty, use a soft cloth dampened with a soap and water solution or a weak detergent solution.
eNever use alcohol, paint thinner or benzine to clean this unit.
eBefore using chemically treated cloth, read the instructions that came with the cloth carefully.
ROT5733